Alora Marcel PD464014 Handleiding

Bekijk gratis de handleiding van Alora Marcel PD464014 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over Alora Marcel PD464014 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Step 1

Remove fixture from its original package.

Step 2

Separate mounting plate (1c) from canopy (2a) by removing canopy

screws (2b).

Step 3

Attach mounting plate (1c) to electrical junction box (1a) using junction

box screws provided (1e) in hardware package.

Step 4

Place fixture ring (3b) onto glass (3d) and secure fixture socket (3c) to

fixture by threading clockwise.

Step 5

Determine hanging height of fixture by securing rods (2d) to canopy (2a)

and fixture body (3a) after feeding fixture wires through rods.

Step 6

Make proper electrical connections ( to to blackhotwhite “L”, neutral

“N”, ground“GND” to ) with wire nuts (1b) provided in hardware

package.

Step 7

Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).

Step 8

Install recommended lamp (4a) (not provided) (referred on the socket

label for maximum wattage and type) to fixture socket (3c).

You are now ready to enjoy your fixture.

Marcel

PD464014

NOTEIC

• T r far suct out t et caot heimpotantsaegudsandintrionslinedinhisshenn

cov le ct t that may occur.tst be er allpossibondiions andsituaions I mu

undeood hat tainbeoled.hesrsttcaut cerion and care factorsust m flow Te

inions idedsahighendstructarrove p foyor ur fet we y andly recomm that a

liensed,tricianintall hisnic tralecined e st ut.

• T ur tountcorrectlstall staard hisfixte is designedo be med on a y inednd

rouoco throur boithaer T bond or tagon bx ORgh a wiingx w a plstr fame.hex

mubesecounedhee heding.heossbst urely mt to t stcturruotf buil T crar and

happliedshobeused,diingheherdware su uld rectly mount t fixture to t o

utlet

bomake le to correctl t ure.x y mait impossiby alignhefixt

WD CAISARNINGS ANUTON

· Make sure is POWERCOMPLETELY OFFat the fuse box

·Have your fixture installed by a qualified licensed electrician

· Prepare everything in a clear area

· Wear gloves at all times during this installation

·Read instructions carefully before you start assembly

· Keep this installation sheet for future reference

P.

CDA:ANA19054 28 - Sur V3Z 6Mth Ave.,rey,C B3

USA:3035 ELiRd.Vs, N1. one Mountan - Las egaV 8908

www.aloram.comood

TECHNICPOTAL SUPR

1.855.855.8926

tcalpprtlr.cechnisuo@aoalightingom

1.855.855.8926

20230109

Please Note:

· 120V input

ASSEMBLY INSTRUCTIONS

1a.

1b.

1c.

1e.

2d.

3b.

2b.

2a.

3a.

3c.

3d.

4a.

Product specificaties