Allen-Heath M-Dante Handleiding

Bekijk gratis de handleiding van Allen-Heath M-Dante (12 pagina’s), behorend tot de categorie Staafmixer. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Allen-Heath M-Dante of wil je andere gebruikers van dit product iets vragen? Stel een vraag

M-DANTE one of several plug-in card options available from Allen & is

Heath that may be fitted to iLive, GLD and ME Series products.

Dante

TM

is a high performancemulti-channel, AVB ready industry ,

standard digital media transport system developed by Australian

company that runs over standard IP networks and can Audinate

distribute signals between iLive, computers and 3

rd

party Dante

TM

enabled equipment. Its main benefits are:

64 channel bi-directional audio plus control over CAT5

Uses standard off-the-shelf computer networking equipment

Easy to add, name, remove and rearrange devices

Secondary port for redundant connection option

Control port can bridge other control network over Dante

Very low latency

Direct connection to computer for multitrack recording

Dante Virtual Soundcard (DVS) software

Dante Controller software for setting up the network

Note The Allen & Heath card provides an interface to the M-DANTE

Dante network. The Dante ‘Brooklyn II’ hardwareused and the software

required to set it up and record to computer is provided and supported

by . For further information or help on using Dante please refer Audinate

to the documentation and support at Audinate: www.audinate.com

M-DANTEis supplied with one Dante Virtual Soundcard licenceto

enable a single computer. More can be purchased from Audinate if

required. The token below is needed to obtain your licence Id. Please

read the instructions provided within this guide.

Dante Virtual Soundcard Licence ID token:

Dante Option CardPublication AP8340

Fitting and Setup Guide

This guide applies to Dante Release 2 (firmware 3.6.4) or later.

This release adds dual redundancy and supports bridging of other control networks over

Dante. Please refer to the notes regarding differences with previous firmware 3.4.15.

Part number M-DANTE-A

Issue 4

Product specificaties