Alcatel SP2602 Handleiding

Alcatel Telefoon SP2602

Lees hieronder de 📖 handleiding in het Nederlandse voor Alcatel SP2602 (2 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.2 sterren beoordeeld

Pagina 1/2
Environment
Declaration of conformity to the rule of the American Federal Communications Commission (FCC)
This symbol means that your inoperative electronic appliance must be collected separately
This equipment has been tested and declared compliant with the limitations relating to a class B digital
device, in accordance with Subsection J of Section 15 of the FCC rules.
These provisions aim to ensure reasonable protection against harmful interferences when the device is
used in a commercial environment. This equipment generates, uses and can emit radio energy and, if
not installed in accordance with the instructions of this manual, can cause interference of such a nature
inerferences to which the user is responsible for correcting at his own expense.
and not mixed with the household waste. The European Union has implemented a specific
collection and recycling system for which producers' are responsible.
This appliance has been designed and manufactured with high quality materials and components
that can be recycled and reused.
Electrical and electronic appliances are liable to contain parts that are necessary in order for the
system to work properly but which can become a health and environmental hazard if they are not
handled or disposed of in the proper way. Consequently, please do not throw out your inoperative
appliance with the household waste. If you are the owner of the appliance, you must deposit it at the
appropriate local collection point or leave it with the vendor when buying a new appliance.
(a)- If you are a professional user, please follow your supplier's instructions.
(b)- If the appliance is rented to you or left in your care, please contact your service provider.
Please help us protect the environment in which we live!
SP2602
QUICK START GUIDE
Model : SP2602
A/W .: No 10002823 Rev.0 (EN)
P t arin ed in Chin
Declaration of conformity for the European Community
ATLINKS declares that SP2602 telephones comply with the relevant basic requirements and Alcatel
2024
Alcatel is a trademark of Nokia, used under license by ATLINKS.
provisions of the European directives 2014/30/EU and 2014/35/EU. You can download the declaration of
conformity from the following address: www.alcatel-home.com .
The CE logo shown on the products indicates that they are compliant with the basic requirements of all
the applicable directives.
Display icon description
Messages waiting indicator
Line/multifunction keys
Access to voicemail
Up navigation key
Shortcut to call log
Down navigation key
Shortcut to Status
Left and right navigation keys.
In idle mode, browse the on-screen
shortcuts (then press OK to select)
OK key/Access to Main menu
Internet is disconnected
X
No IP address
!
Internet connected
Received call(s)
Dialed call(s)In headset mode
In handset mode
In hands-free mode
Silent mode
Call is on hold
Mute activated
Auto-answering
activated
DND disabled (blue)
Do not disturb
activated (Red)
Call Forward activated
VPN activated
VLAN activated
Keypad locked
Forwarded call(s)
New VM Messages
In-call voice
quality level
New SMS
SMS
Missed call(s)
Soft keys
Headset key
In idle mode: ringer off
In communication mode: mute/unmute a call
Access to redial list
Activate/deactivate hands free
Call hold/resume key
Call transfer key
Phonebook key
Conference key
Status key
In idle mode or during ringing:
increase or decrease ringer volume.
In communication: increase or
decrease handset, headset or speaker volume.
Long press to lock keypad.
Enter PIN to unlock keypad (default 123)
1
1. Press > > .Menu Features Call Forward
2. Select the line, the type of forward, enter the destination number and status and press . OK
1. Press key to check phone IP address (or > ) .Menu Status
2. Open a web browser on your computer. Enter http:// and the IP address in the address bar and validate.
3. Default login and password are « admin/admin » for administrator.
4. Minimum config is sip account. Check administrator guide for details.
Note Menu System : you can also configure the phone through its menu. Press > (default pwd 123),
then select and/or to edit relevant parameters and press .Network Accounts OK
Phone web interface
Language setting
Making a call
Accepting a call
Putting a call on hold
Multi-party conference
Call transfer
Phonebook
Call forward
Call list
Redial
Do not disturb
Programmable keys
Voice mail
• Press Menu > Basic > Language.
• Select the desired language and press .
• enter the phone number and pick up the handset.Pre-dialling :
• lift the handset and enter the phone number.Direct dialling :
• enter phone number and press or vice versa .Handsfree :
• enter phone number and press or vice versa.Headset :
• : press the desired line key, dial the number and press .With a specific outbound line Dial
• pick up the handset.With the handset :
• press .With a headset :
• press . With the handsfree :
• Press key or soft key. To retrieve the call press again or soft key.Hold Resume
Note: with more than one active call, select desired call with the navigator keys and
use the key or corresponding softkey to hold/resume.
1. Once in line with 1st caller, press key or soft key, 1st caller is put on hold.Conf
2. Then call the 2
nd
number.
3. After, 2nd call is established, press key or soft key to set up the conference.Conf
Attended transfer :
1. Press key or soft key during the active conversation, the call is put on hold.Xfer
2. Dial the second telephone number.
3. When the call is answered, press again or soft key to complete the operation.Xfer
Blind transfer :
1. Press key or soft key during the active conversation, the call will be on hold.Xfer
2. Then enter the 2nd telephone number and press or soft key.Xfer
1. Press up navigation key or highlight on-screen shortcut with right navigation key and
then , or press > > .OK Menu Call Log Local Call Logs
2. Scroll through the list using .
3. To dial an entry, press soft key or pickup handset or press or . Dial
Access phonebook :
1. Press soft key, or > Local Contacts, or Menu > > Contacts Contacts Local Contacts.
2. Select or other group.All contacts
To dial an entry, press soft key or pickup handset or press or . Dial
Add new entry :
1. Access desired phonebook as explained above, then press .Add
2. Enter name and number and press soft key.OK
Program DSS keys :
1. You can use the phone web interface to configure these keys ,
or
2. You can go to > > > . Menu Basic Keyboard DSS Key settings
Select the key, function and value if needed and press .OK
Program other keys :
idle mode.
2. To do so, you can use the web interface, or press > > , Menu Basic Keyboard
choose among the possible configurable items, select your desired value and press .OK
1. Press , select the desired call and press soft key or pickup handset or press or .Dial
1. Press soft key to enable/disable device DND mode. DND
2. Or press > > (or highlight on-screen shortcut with right navigation key Menu Features DND
and then ), select and , and press key. OK Mode Type OK
1. To access your voice mailbox, press (or highlight on-screen shortcut with right navigation key
and then ). Number of messages will be indicated if provided by your server or pbx.OK
2. Select the line and press to call.Play


Product specificaties

Merk: Alcatel
Categorie: Telefoon
Model: SP2602

Heb je hulp nodig?

Als je hulp nodig hebt met Alcatel SP2602 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden