ADDAC System ADDAC310 Handleiding
ADDAC System
Niet gecategoriseerd
ADDAC310
Bekijk gratis de handleiding van ADDAC System ADDAC310 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.5 sterren uit 2.5 reviews. Heb je een vraag over ADDAC System ADDAC310 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
June.2024
USER’S GUIDE . REV01
ADDAC310
PRESSURE
TO CV
INTRODUCING
From Portugal with Love!
Instruments for Sonic Expression
Est.2009
ADDAC310
PRESSURE TO CV USER’S GUIDE
June.2024Revision.01
Welcome to:
page 2ADDAC SYSTEM
WELCOME
This module expands our line of expressive controls, it follows the
heritage of wind/breath controllers with one major diference, the pipe
has no air escape creating pressure inside the tube controlled by the
user’s mouth. For a seasoned woodwind or brass musicians this working
principle may sound unorthodox, however this way pressure can be
controlled for longer without the need to breath in or learning circular
breathing techniques. It’s relatively easy to control the pressure in your
mouth while still breathing through the nose.
The module is provided with a standard melodica pipe which connects
to an air filter (providing a receptacle for condensation to form and
isolate the sensor) and lastly connects to the module frontpanel.
The signal captured by the sensor is then sent to two independent
sections with exactly the same functions as seen in the signal flow
diagram below.
As an example the two sections can be used with diferent settings to
independently control the VCA and VCF of any standard analog voice
patch.
Tech Specs:
10HP
4.5cm deep
70mA +12V
40mA -12V
PIPE INPUT
ATTACK
ENVELOPE PROCESSING
DECAY
GAIN
OFFSET
GAIN
OFFSET
THRESHOLD
GATE FOLLOW
MODES ROUTING
GATE HOLD
MODES ROUTING
HOLD
GATE A OUTPUT
ATTACK
ENVELOPE PROCESSING
DECAY
RESPONSE CURVE RESPONSE CURVE
GAIN
OFFSET
THRESHOLD
HOLD
GATE A OUTPUT
INVERTER
CV OUTPUT
INVERTED CV OUTPUT
CV OUTPUT
INVERTED CV OUTPUT
INVERTER
GAIN
OFFSET
GATE FOLLOW
MODE ROUTING
GATE HOLD
MODES ROUTING
CHANNEL A CHANNEL B
ADDAC310 User’s Guide
page 3ADDAC SYSTEM
CONTROLS DESCRIPTION
[CV OUTPUT LEDS] Two leds for each channel monitors the
bipolar CV Output.
[HOLD PUSH BUTTON] Latch button turns the hold function
On or Off.
[ATTACK] & [DECAY] Sets the Attack & Decay that will slew
the sensor raw value.
[GAIN] Sets the channel CV gain.
[OFFSET] Sets the channel CV offset.
[RESPONSE] Sets the sensor calibration response curve.
[GATE THRESHOLD] Sets the threshold for the gate output.
[PIPE INPUT] The sensor input to connect the external pipe.
[GATE STATE LED] Monitors the Gate Output state.
[HOLD GATE INPUT] Gate input for the Hold function.
[GATE OUTPUT]
[INVERTED CV OUTPUT]
[CV OUTPUT]
PIPE
We’re using a standard Melodica pipe into an air filter that
will keep condensation away from the sensor. The air filter is
then connected to the frontpanel sensor input using a silicone
tube.
SENSOR CALIBRATION
[RESPONSE] is the main control to calibrate the pressure
curve, the knob goes from exponential to logarithmic with
linear at 12 o’clock. Exponential will be more reactive to high
pressures, logarithmic to lower pressures.
RESPONSE: EXP LIN LOG
Product specificaties
| Merk: | ADDAC System |
| Categorie: | Niet gecategoriseerd |
| Model: | ADDAC310 |
Heb je hulp nodig?
Als je hulp nodig hebt met ADDAC System ADDAC310 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd ADDAC System
5 Augustus 2025
5 Augustus 2025
4 Augustus 2025
4 Augustus 2025
30 Januari 2025
1 Oktober 2024
1 Oktober 2024
1 Juni 2024
4 Mei 2024
4 Mei 2024
Handleiding Niet gecategoriseerd
- Bavaria
- Neve
- Huion
- Comica
- Jamo
- Sensative
- Iluv
- Ednet
- Bowers And Wilkins
- Austral
- Storm
- GEV
- Nureva
- Opus
- Privileg
Nieuwste handleidingen voor Niet gecategoriseerd
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025