Campbell Hausfeld DH650001AV Handleiding

Bekijk gratis de handleiding van Campbell Hausfeld DH650001AV (24 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Campbell Hausfeld DH650001AV of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

Description

Air operated spray guns are designed

to perform a variety of painting,

coating, and finishing applications

using the power of compressed air.

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,

observe the following symbols.

Danger indicates

an imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

Warning indicates

a potentially

hazardous situation which, if not

avoided, COULD result in death or

serious injury.

Caution indicates a

potentially

hazardous situation which, if not

avoided, MAY result in minor or moderate

injury.

Notice indicates

important

information, that if not followed, may

cause damage to equipment.

Unpacking

After unpacking the product, inspect

carefully for any damage that may

have occurred during transit. Make sure

to tighten fittings, bolts, etc., before

putting unit into service.

Do not operate

tool if damaged

during shipping, handling or use.

Damage could result in bursting and

cause injury or property damage.

Operating Instructions Air Operated Models

General Safety

Information

1. Read all manuals

included with this

product carefully. Be

thoroughly familiar with

the controls and the

proper use of the equipment.

2. Follow all local electrical and safety

codes as well as in the United

States, the National Electrical Codes

(NEC) and Occupational Safety and

Health Act (OSHA).

CALIFORNIA PROPOSITION 65

You can

create

dust when you cut, sand,

drill or grind materials such

as wood, paint, metal,

concrete, cement, or other

masonry. This dust often contains

chemicals known to cause cancer, birth

defects, or other reproductive harm.

Wear protective gear.

WORK AREA

•

Never spray closer

than 25 feet to the

compressor! If possible,

locate compressor in

separate room. Never

spray into the compressor, compressor

controls or the motor.

•

Do not spray flammable

materials in vicinity

of open flame or near

ignition sources. Motors,

electrical equipment

and controls can cause

electrical arcs that will ignite a

flammable gas or vapor. Never store

flammable liquids or gases in the

vicinity of the compressor.

IN234901AV 4/17

•

Do not smoke or eat when spraying

paint, insecticides, or other flammable

substances.

•

Keep hose away from sharp objects.

Bursting air hoses may cause injury.

Examine air hoses regularly and

replace if damaged.

•

Always work in a clean environment.

To avoid injury or damage to the

workpiece, do not aim the spray gun at

any dust or debris.

•

Keep visitors away and NEVER allow

children or pets in the work area.

PERSONAL SAFETY

•

Use a face mask/respirator,

non-skid shoes, and

protective clothing when

spraying. Always spray in

a well ventilated area to prevent health

and fire hazards. Refer to Material

Safety Data Sheets (MSDS) of spray

material for details.

•

Always wear eye

protection

•

Never use oxygen, carbon dioxide,

combustible gases or any bottled gas

as an air source for the spray gun.

Such gases are capable of explosion

and serious injury to persons.

•

Do not misuse this product. Excessive

exposure to vibration, work in

awkward positions, and repetitive

work motions can cause injury to

hands and arms. Stop using any tool

if discomfort, numbness, tingling, or

pain occur, and consult a physician.

•

Never aim or spray at yourself or

anyone else or serious injury could

occur.

MANUAL

Spray Guns

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

See Warranty on page 8 for important information about commercial use of this product.

For parts, product & service information

visit www.campbellhausfeld.com

© 2017 Campbell Hausfeld

A Marmon/Berkshire Hathaway Company

Product specificaties