Adastra RM406 Handleiding

Adastra Receiver RM406

Lees hieronder de 📖 handleiding in het Nederlandse voor Adastra RM406 (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

RM4 06

Rackmount 6-zone Mixer-Amplifier

Item ref: 160 953. UK

User Manual

Version 1.1

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

953.160 User Manual UK

Introduction

Thank you for choosing the Adastra RM4 rackmount 6-zone mixer-amplifier as part of your public address 06

system. This unit is designed to offer high quality, dependable service for mobile and installed systems.

Please read this manual to gain the best results from your product and avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

SAFETY NOTICE

1. Prior to use, read through this manual

2. Keep the manual in good condition

3. Pay attention to safety warnings

4. Observe all operating requirements

5. Do not use the device near water or wet areas

6. For cleaning, only use a lint-free, dry cloth

7. Install according to the specifications

8. Place away from heat sources or heating appliances

9. Use mains lead provided and avoid damage to cable or connectors

10. Unplug power from mains during stormy weather or if unused for long periods

11. In case of malfunction, water ingress or other damage, consult qualified service personnel

12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing

13. Please pay attention to warning symbols during transit and placement

14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel

15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection

16. Ensure correct operation of the mains switch

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.

If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before

further use. Avoid impact, extreme pressure or heavy vibration to the case

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

• Check for correct mains voltage and condition of IEC lead before connecting to power outlet

• Use double insulated speaker wire with adequate current rating for 100V speaker connections

• Only use 1 type of output per zone do not mix or combine these outputs on a single zone – i.e. 4Ω, 8Ω or 100V –

• Do not connect speakers to the s 4Ω or 8Ω speakers to the 100V terminal or 100V 4Ω or 8Ω terminal

• Do not allow any foreign objects to enter the case or through the ventilation grilles

Placement

• For rack-mounting, ensure adequate support for the weight of the amplifier

• Ensure adequate air-flow and do not cover cooling vents at the sides of the amplifier

• Ensure adequate access to controls and connections

Cleani ng

• Use a soft cloth with a neutral detergent to clean the casing as required

• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

• Do not use strong solvents for cleaning the unit

953.160 User Manual UK

Front panel

Rear panel

Media player

19.

USB port

Mic/Line 1 level control

20.

Media playback zone assign buttons

Mic/Line 2 level control

21.

Mic/Line 1 zone assign buttons

Mic/Line 3 level control

22.

Mic/Line 2 zone assign buttons

Auxiliary line input level control

23.

Mic/Line 3 zone assign buttons

Zone 1 output level control

24.

Auxiliary line input zone assign buttons

Zone 1 monitor send button

25.

Zone 4 output level control

Zone 1 output LED indicators

26.

Zone 4 monitor send button

Zone 2 output level control

27.

Zone 4 output LED indicators

10.

Zone 2 monitor send button

28.

Zone 5 output level control

11.

Zone 2 output LED indicators

29.

Zone 5 monitor send button

12.

Zone 3 output level control

30.

Zone 5 output LED indicators

13.

Zone 3 monitor send button

31.

Zone 6 output level control

14.

Zone 3 output LED indicators

32.

Zone 6 monitor send button

15.

Chime button

33.

Zone 6 output LED indicators

16.

Chime output level control

34.

Monitor headphones output

17.

Power indicator

35.

Monitor output level control

18.

SD card slot

36.

Power on/off switch

37.

Voltage selector

47.

Mains power inlet (IEC) and fuse holder

38.

Zone 1 speaker output terminals

48.

Zone 2 speaker output terminals

39.

Zone 3 speaker output terminals

49.

Zone 4 speaker output terminals

40.

Zone 5 speaker output terminals

50.

Zone 6 speaker output terminals

41.

Zones 1-6 line level outputs (RCA)

51.

Monitor line level output (2 x RCA)

42.

Channel 4 Auxiliary input (2 x RCA)

52.

Channel 3 DIP switches (mic/line + phantom)

43.

Chann 3 Mic/Line input (XLR/jack) el

53.

Channel 2 DIP switches (mic/line + phantom)

44.

Channel 2 Mic/Line input (XLR/jack)

54.

Channel 1 DIP switches (mic/line + phantom)

Channel 1 Mic/Line input (XLR/jack)

55.

Channel 1 priority switch

46.

Antenna connection

56.

24V emergency mute contacts

Product specificaties

Merk:	Adastra
Categorie:	Receiver
Model:	RM406
Kleur van het product:	Zwart
Gewicht:	11000 g
Breedte:	433 mm
Diepte:	89 mm
Hoogte:	403 mm
Breedte verpakking:	475 mm
Diepte verpakking:	550 mm
Hoogte verpakking:	160 mm
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad en draadloos
Meegeleverde kabels:	AC
Aantal USB 2.0-poorten:	1
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	240 W
Volumeregeling:	Draaiknop
Ingang stroom:	Ja
Audio-uitgangskanalen:	3.0 kanalen
Frequentiebereik:	100 - 24000 Hz
Signaal/ruis-verhouding:	84 dB
Totale harmonische vervorming (THD):	0.76 procent
XLR in:	Ja
AC-ingangsspanning:	170 - 264 V
AC-ingangsfrequentie:	50 Hz
Piekvermogen per kanaal:	40 W
Synchronisatie ingangsimpedantie:	1000 Ohm
Versterker klasse:	D
Speakers connectiviteit type:	RCA
Line inputs (RCA):	3
Gain aanpassing:	Draaiknop
USB-poorttype:	USB Type-A