Yamaha GA32/12 Handleiding

Yamaha Mengpaneel GA32/12

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Yamaha GA32/12 (26 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
E
MIXING CONSOLE
Ownerā€™s Manual
ii
GA32/12, GA24/12ā€”Ownerā€™s Manual
Precautions
1. Avoid excessive heat, humidity, dust and
vibration
Keep the unit away from locations where it is
likely to be exposed to high temperatures or
humidity ā€” such as near radiators, stoves, etc.
Also avoid locations which are subject to exces-
sive dust accumulation or vibration which could
cause mechanical damage.
2. Ventilation
The unit has ventilation slots on the top, rear and
bottom panels. Do not block these vents.
3. Avoid physical shocks
Strong physical shocks to the unit can cause dam-
age. Handle it with care.
4. Do not open the case or attempt repairs
or modiļ¬cations yourself
This product contains no user-serviceable parts.
Refer all maintenance to qualiļ¬ed Yamaha service
personnel. Opening the case and/or tampering
with the internal circuitry voids the warranty.
5. Always power oļœƒ before making connec-
tions
Always turn the power OFF before connecting or
disconnecting cables. This is important to pre-
vent damage to the unit itself as well as other con-
nected equipment.
6. Handle cables carefully
Always plug and unplug cables ā€” including the
AC power cord ā€” by gripping the connector, not
the cord.
7. Clean with a soft dry cloth
Never use solvents such as benzine or thinner to
clean the unit. Wipe clean with a soft, dry cloth.
8. Always use the correct power supply
Make sure that the power supply voltage speciļ¬ed
on the rear panel matches your local AC mains
supply. Also make sure that the AC mains supply
can deliver more than enough current to handle
all equipment used in your system.
Contents
Introduction .......................................1
Features..................................................................1
Front Panel .........................................2
Monaural input channels......................................2
Stereo input channels............................................4
Master Section ...................................6
Variable/Fix select section.....................................6
Mix section ............................................................6
ST (Stereo) section ................................................9
AUX RETURN section........................................10
MATRIX section..................................................11
C-R MONI (Control room monitor) section
PHONES (headphones) section .........................12
TAPE IN section..................................................13
TALKBACK section ............................................14
METER SELECT section.....................................15
Meter bridge ........................................................15
Rear Panel ........................................16
GA Diversity Function ......................19
What is GA Diversity?.........................................19
Setting the GA Diversity function ......................19
Speciļ¬cations ...................................20
General speciļ¬cations .........................................20
Input speciļ¬cations.............................................21
Output speciļ¬cations ..........................................21
Dimensions..........................................................22
Block and Level diagram.....................................23
IMPORTANT NOTICE FOR
THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT: The wires in this mains lead are coloured in accordance with
the following code:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured GREEN and YELLOW must be connected to
the terminal in the plug which is marked by the letter E or by the safety earth
symbol or coloured GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which
is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
* This applies only to products distributed by YAMAHA KEMBLE
MUSIC (U.K.) LTD.
Introduction
1
GA32/12, GA24/12ā€”Ownerā€™s Manual
Introduction
Thank you for choosing the Yamaha GA32/12 or GA24/12 mixing console. Please read
this manual thoroughly to take best advantage of the console and extend its useful life.
Notes:
This manual has been written on the assumption that you already understand the basic
operation and technical terminology of mixing consoles.
Descriptions of GA24/12 speciļ¬cations appear in brackets ({}) if they differ from the
GA32/12.
Features
ā€¢ The GA32/12 provides 28 monaural and 2 stereo
input modules {the GA24/12 provides 20 mon-
aural and 2 stereo input modules}. The output
channels comprise stereo outputs, 10 mix out-
puts, and two matrix outputs, and support a wide
range of applications, from SR (sound reinforce-
ment) to facility acoustics.
ā€¢ Each monaural input channel offers a 26 dB pad,
HPF, phase switch, 4-band EQ (HI-MID and LO-
MID frequencies are variable), and a 100 mm-
long full-stroke fader. Also, phantom power can
be turned on and off for every group of four
inputs.
ā€¢ Four stereo AUX returns and TAPE IN jacks are
provided as standard.
ā€¢ The master section of the console is located in the
center area of the unit, facilitating operation.
ā€¢ The master section provides output channels for
MIX buses 1ā€“10, with EQs and 100 mm-long
faders.
ā€¢ Each input channel and four stereo AUX returns
include a PFL switch, and stereo bus, MIX buses
1ā€“10, and Matrix 1ā€“2 has an AFL switch,
enabling you to monitor the input/output
sources quickly.
ā€¢ Using the GA Diversity function enables you to
set MIX buses 1ā€“4 to Variable mode or Fix mode
individually. In Variable mode, you can change
the level of the signals sent out from the input
channels. This routing can be used as a conven-
tional AUX bus. In Fix mode, the level of the sig-
nals sent out from the input channels is ļ¬xed.
This routing can be used as a conventional group
bus. In this way, you can conļ¬gure the bus for a
speciļ¬c purpose.
ā€¢ The console has two independent matrixes. You
can mix MIX buses 1ā€“4 and the stereo bus indi-
vidually at the levels you desire and output them
from the MATRIX OUT 1ā€“2 jacks. This routing
can be used as a mix for the foldback or for indi-
vidual speakers and ampliļ¬ers.
ā€¢ The INSERT I/O jacks are provided for all mon-
aural input channels, the stereo bus, and MIX
buses 1ā€“4. You can insert an external effect pro-
cessor, if necessary.
ā€¢ Talkback signals can be sent to any of MIX buses
1ā€“4, MIX buses 5ā€“10, and the stereo bus.
ā€¢ C-R monitor output enables you to select PFL/
AFL or TAPE IN as a monitoring source.
ā€¢ The consoleā€™s sturdy ļ¬nish and rugged design
assure its durability even under severe conditions
and rough on-site usage.


Product specificaties

Merk: Yamaha
Categorie: Mengpaneel
Model: GA32/12

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha GA32/12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Yamaha

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel