WyreStorm EXP-CON-H2-DD Handleiding
WyreStorm
Niet gecategoriseerd
EXP-CON-H2-DD
Bekijk gratis de handleiding van WyreStorm EXP-CON-H2-DD (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.4 sterren uit 5.5 reviews. Heb je een vraag over WyreStorm EXP-CON-H2-DD of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

EXP-CON- -DD | CON- - -EARC H2 H2 DD
Application Programming Interface
Document
Revision
V1 .0
Document Date
November 2020
Supported
Firmware
Refer to for details. Supported Product Firmware/Software

Copyright © 20 WyreStorm Technologies | 20 WyreStorm.com
CON- - H2 DD API | 201111
2 of 8
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
Contents
1. Overview ................................................................................................................................. 3
1.1 Supported Product Firmware/Software ........................................................................................................................ 3
2. Wiring and Communication Conguration 3...........................................................................
2.1 RS-232 Connections ..................................................................................................................................................... 3
3. Command Overview ............................................................................................................... 4
4. Audio Settings ........................................................................................................................ 5
5. EDID Settings ......................................................................................................................... 6
6. General ................................................................................................................................... 7
7. Contacting Technical Support ............................................................................................... 8
8. Document Revision History ................................................................................................... 8

Copyright © 20 WyreStorm Technologies | 20 WyreStorm.com
CON- - H2 DD API | 201111
3 of 8
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1. Overview
This API (Application Programming Interface) document provides the necessary connections, congurations and
commands needed in order to control the EXP-CON- -DD or CON- - -EARC. Note that some API commands are H2 H2 DD
specic to model.
1.1 Supported Product Firmware/Software
The following products and rmware versions are supported by this version of the API. The rmware versions listed are
the minimum supported at time of publication, rmware may be higher except where otherwise noted.
Product
Status Since Last Doc
Rev
Supported Product
Versions
EXP-CON- - H2 DD
New
V1 or higher
CON- - -EARC H2 DD
New
V1 or higher
2. Wiring and Communication Configuration
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the
switcher. Read through this section in this entirety before running or terminating the wires to ensure proper operation and
to avoid damaging equipment.
2.1 RS-232 Connections
The following wiring diagrams show the pinouts for the WyreStorm device. While not shown, connect the TX (transmit) to
RX (receive) pins at the control system or PC side of the cable. Most control systems and computers are congured for
Digital Terminal Equipment (DTE) where pin 2 is RX and pin 3 is TX This can vary from device to device, refer to the
documentation for the connected device for pin functionally to ensure that the connect connections can be made.
RS-232 Port Settings
Baud rate:
57600 bps
Data Bits:
8bits
Parity:
None
Stop Bits:
1bit
Flow Control:
None
Product specificaties
Merk: | WyreStorm |
Categorie: | Niet gecategoriseerd |
Model: | EXP-CON-H2-DD |
Kleur van het product: | Zwart |
Gewicht: | 420 g |
Breedte: | 215 mm |
Diepte: | 118 mm |
Hoogte: | 25 mm |
LED-indicatoren: | Ja |
Ondersteunde video-modi: | 1080p, 2160p |
Vermogensverbruik (max): | 8 W |
Certificering: | CE, FCC, RCM, EAC |
HDCP: | Ja |
Audio-uitgang: | RCA, S/PDIF |
Duurzaamheidscertificaten: | RoHS |
Temperatuur bij opslag: | -20 - 70 °C |
Luchtvochtigheid bij opslag: | 10 - 90 procent |
Rack-montage: | Ja |
HDMI in: | 1 |
HDCP versie: | 2.2 |
Aantal HDMI-uitgangen: | 1 |
Warmtedissipatie: | 27.2 BTU/h |
Rackcapaciteit: | 1U |
Bedrijfstemperatuur (T-T): | 0 - 45 °C |
Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |
Geschaalde resoluties: | 1920 x 1080,3840 x 2160,4096 x 2160 |
Ondersteunde chroma-subsampling: | 4:2:2, 4:4:4, 4:2:0 |
EDID-management: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met WyreStorm EXP-CON-H2-DD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd WyreStorm
3 April 2025
16 November 2023
16 November 2023
16 November 2023
16 November 2023
16 November 2023
16 November 2023
15 November 2023
15 November 2023
15 November 2023
Handleiding Niet gecategoriseerd
- Sanus
- Hozelock
- IMG Stage Line
- Christmas Time
- Kopykake
- Adonit
- Kensington
- WesAudio
- Edimax
- Betty Bossi
- Baby Brezza
- Marmitek
- Jupio
- SecureSafe
- American DJ
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025