WyreStorm EXP-CON-AUD-H2 Handleiding

WyreStorm Niet gecategoriseerd EXP-CON-AUD-H2

Bekijk gratis de handleiding van WyreStorm EXP-CON-AUD-H2 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 1.5 reviews. Heb je een vraag over WyreStorm EXP-CON-AUD-H2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

Digital & Analog Audio Extractor

with 18Gbps HDMI Passthrough

EXP-CON-AUD-H2 Quickstart Guide

EXP-CON-AUD-H2 Quickstart Guide | 200330

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 4

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the

installation process.

Basic Wiring Diagram

IMPORTANT! Installation Requirements

• Visit the product page to download the latest documentation.

• Read through the section for important wiring Wiring and Connections

guidelines before creating or choosing premade cables.

In the Box

1x EXP-CON-AUD-H2 Audio Converter

1x 5V DC 1A Power Supply with Wall Adapters

2x Mounting Brackets

dio

udio

HDMI Source

AVR

Multiroom Amplifier

4K/UHD HDMI Display

Front Panel Rear Panel

Power In

2.1mm DC Jack Input

Connect to the included 5V DC 1A power

supply.

Power LED

Solid: The unit is powered On

Off: The unit is powered Off

HDMI In

19-pin type A HDMI female

Supports HDMI and DVI/D with adapter

EDID Switch

Switch between Passthrough, 2ch and 5ch

Audio Modes

HDMI Output

19-pin type A HDMI female

Supports HDMI and DVI/D with adapter

Optical Output

Toslink optical port

Connect to digital audio input of pre-amplier,

AVR or audio system

Analog Audio

Output

2 x RCA (L/R Phono) Ports

Connect to analogue audio input of pre-

amplier, AVR or audio system

EXP-CON-AUD-H2 Quickstart Guide | 200330

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

2 of 4

C D A

Troubleshooting

No or Poor Quality Picture (snow or noisy image)

• Verify that power is being supplied to the device

• Verify that all HDMI connections are not loose and are functioning properly

Troubleshooting Tips:

• WyreStorm recommends using a cable tester or connecting the cable to

other devices to verify functionality.

Audio Connections

Analog Audio Out

Tip: Audio Postive (+)

Shield: Audio Negative (-)

EXP-CON-AUD-H2 Quickstart Guide | 200330

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

3 of 4

Setup and Conguration

EDID Switch Settings

Pass Through

(Default)

Allows EDID pass-through from the display to the

source for optimum video and audio outputs to the

display.

Pass 2.0CH 5.1CH

EDID

2.0CH

Transfers 2.0CH EDID of EXP-CON-AUD-H2 to the

source for optimum video and 2.0CH audio outputs

to the display.

Pass 2.0CH 5.1CH

EDID

5.1CH

Transfers 5.1CH EDID of EXP-CON-AUD-H2 to the

source for optimum video and 5.1CH audio outputs

to the display.

Pass 2.0CH 5.1CH

EDID

Note:

• If EDID Copy fails, a xed 1920x1080p @60Hz 2.0CH would be provided to source device.

• In order to achieve a better user experience, please refer to the following audio support descriptions and examples for EDID setting during installation.

1. Slide the EDID to Pass Through (default) - Copy EDID from HDMI out.

Display Audio HDMI Output Audio S/PDIF Output Audio L/R Output Audio

Dolby /DTS 7.1 Dolby/DTS 7.1 - -

Dolby/DTS 5.1 Dolby/DTS 5.1 Dolby/DTS 5.1 -

PCM 7.1 PCM 7.1 PCM 2.0 PCM 2.0

PCM 5.1 PCM 5.1 PCM 2.0 PCM 2.0

PCM 2.0 PCM 2.0 PCM 2.0 PCM 2.0

By default (position “Pass Through”), when connected to a 1080p, PCM5.1 TV, the extractor will transmit the 1080p, PCM5.1 signal to it, S/PDIF Output audio is

PCM2.0, and L/R Output Audio is PCM2.0.

2. Slide the EDID to - The option with 2.0CH.2.0CH

HDMI Output Audio S/PDIF Output Audio L/R Output Audio

PCM 2.0 PCM 2.0 PCM 2.0

Slide to position “2.0CH”, when connected to a 1080p/5.1ch TV, the extractor will transmit the 1080p/2.0ch signal to it, S/PDIF Output audio is PCM2.0, and L/R

Output Audio is PCM2.0.

3. Slide the EDID to - The option with 5.1CH5.1CH

Display Audio HDMI Output Audio S/PDIF Output Audio L/R Output Audio

Dolby /DTS 7.1 Dolby/DTS 7.1 - -

Dolby/DTS 5.1 Dolby/DTS 5.1 Dolby/DTS 5.1 -

PCM 7.1 PCM 7.1 PCM 2.0 PCM 2.0

PCM 5.1 PCM 5.1 PCM 2.0 PCM 2.0

PCM 2.0 PCM 2.0 PCM 2.0 PCM 2.0

Slide to position “5.1CH”, when connected to a 1080p, PCM7.1 TV, the extractor will transmit the 1080p, PCM5.1 signal to it, S/PDIF Output audio is PCM2.0, and

L/R Output Audio is PCM2.0.

Product specificaties

Merk:	WyreStorm
Categorie:	Niet gecategoriseerd
Model:	EXP-CON-AUD-H2
Kleur van het product:	Zwart
Gewicht:	230 g
Breedte:	80 mm
Diepte:	90 mm
Hoogte:	22 mm
Maximum resolutie:	4096 x 2160 Pixels
Certificering:	CE, FCC
Duurzaamheidscertificaten:	RoHS
Audio (L,R) out:	1
Aantal:	1
Temperatuur bij opslag:	-20 - 70 °C
Luchtvochtigheid bij opslag:	10 - 90 procent
Rack-montage:	Ja
HDMI in:	1
S/PDIF-uitgang:	Ja
Aantal HDMI-uitgangen:	1
Operating voltage:	5 V
Maximaal bereik:	15 m
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Audio afspeelformaten:	LPCM, PCM