Whirlwind MCT-7 Handleiding

Bekijk de handleiding van Whirlwind MCT-7 gratis online of download de PDF. Deze handleiding is 18 keer bekeken. Vraag over dit model? Stel een vraag

www.whirlwindusa.com

MCT-7

Multiple Cable Test System

INTRODUCTION:

The MCT-7 Cable Tester is a versatile unit that allows the user to test almost any

pre-made and custom made leads or cables used in a typical audio/visual set up.

Leads fitted with any combination of the following connectors may be checked:

• Male or female XLR

• Speakon (4 pole)

• Stereo or mono 1/4” (6.3 mm) jack

• Stereo or mono 1/8” (3.5 mm) mini jack

• Phono RCA

• BNC

• Midi (180 degrees DIN)

The MCT-7 Cable Tester allows you to test for the following conditions:

• Positive Continuity

• Cross Wiring

• Loose Contact

• Open Circuit

• Leakage Between Wires (up to 10KΩ)

• Short Between Wires

• Short to Ground (female XLR & MIDI)

Please read the following instructions carefully before using the MCT-7 Cable

Tester.

Warning: The leads to be tested must be fully disconnected from any other

equipment or electrical source. Failure to do so could result in electrical shock and

permanent damage to the MCT-7 Cable Tester unit, for which the manufacturer

and suppliers can accept no liability.

The MCT-7 Cable Tester comes fitted with a 9 Volt type battery. Under normal

usage this will allow several hundred hours of operation. We advise that before

Beoordeel deze handleiding

Product specificaties

Als je hulp nodig hebt met Whirlwind MCT-7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden