Watts PLT-5 Handleiding

Bekijk gratis de handleiding van Watts PLT-5 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Watts PLT-5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PLT-5 PLT-12 PLT-20

Order No. Order No. Order No.

Description0067370 0067371 0067372

Max. Pressure - psi 150 150 150

Max. Temp. - °F 200 200 200

Tank Volume - gal. 2.1 4.5 8.5

Tank Acceptance - gal. 1.26 2.8 3.4

Air Pre-charge - psi 20 20 20

Connections Size - in.

3

⁄4male

3

⁄4male

3

⁄4male

Diameter - in. 8 10.5 12

1

⁄2

Length - in. 11 13.5 19

3

⁄16

Weight - lbs. 5.5 10 15

Models: PLT-5, PLT-12, PLT-20

Potable Hot Water Expansion Tank

Installation Instructions

Certified to ANSI/NSF 61

(73°F/23°C)

Listed by IAPMO

Acceptance Volume

Air Side Water Side Volume at 150psi

Pre-pressure (10.3 bar) (gallons)

(psi) (bar) PLT-5 PLT-12 PLT-20

20 (1.4) 1.48 3.42 7.102

40 (2.8) 1.26 2.88 5.882

60 (4.1) 1.0 2.49 4.705

80 (5.5) .80 1.85 4.009

Figure 1

(Optional Location)

Support Tank

in Optional

Horizontal

Position

(Optional Location)

Watts

Pressure

Gauge

Watts

Backflow Preventer

Water

Supply

Watts

Shutoff

Valve

Watts Pressure

Reducing Valve

Expansion

Tank

Water

Heater

To System

Watts

T&P

Safety

Relief

Valve

Floor Drain

Discharge Line

IS-PLT

!

WARNING!

Improper installation, adjustment, alteration, service or maintenance can cause property dam-

age, serious bodily injury or death. Read instructions completely before proceeding with instal-

lation. Only qualified personnel may install or service this equipment in accordance with local

codes and ordinances.

Do not exceed 80psi (5.5 bar) air charge. Air charge pressure exceeding 80psi (5.5 bar) could

become hazardous and will void any and all warranties, either written or implied. Failure to fol-

low these instructions will result in the possibility of property damage, serious bodily injury

or death.

This Expansion Tank is designed and intended for water storage at a maximum pressure of

150psi (10.3 bar) and a maximum temperature of 200°F (93ºC). Any use other than for potable

water or a sustained or instantaneous pressure in excess of 150psi (10.3 bar) or 200°F (93ºC)

is UNSAFE and can cause property damage, serious bodily injury or result in death.

Disclaimer: The manufacturer of this tank does not accept any liability or other responsibility for

personal injury or property damage resulting from improper use, installation or operation of this tank

or the system of which it is a part.

Notice: The expansion tank, piping and your connections may in time leak. Select a location

to install the expansion tank where a water leak will not damage the surrounding area. The manu-

facturer is not responsible for any water damage in connection with this expansion tank.

Product specificaties