Wasp WLS9500 Handleiding

Wasp Barcode lezer WLS9500

Bekijk gratis de handleiding van Wasp WLS9500 (41 pagina’s), behorend tot de categorie Barcode lezer . Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 4.6 sterren uit 30.5 reviews. Heb je een vraag over Wasp WLS9500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/41

WandReader

Programming Guide

Please Read

Note:

The Wasp WandReader is ready to scan the most popular

bar codes out of the box. This manual should only be

used to make changes in the conguration of the

scanner for specic applications. This scanner does not

require software or drivers to operate. The scanner enters

data as keyboard data. Please review this manual before

scanning any of the programming bar codes in this manual.

Tech Tip

If you are unsure of the scanner conguration or have

scanned the incorrect codes, please scan the default

bar code on page 6. This will reset the scanner to its

factory settings.

No part of this publication may be reproduced or transmitted in any form

or by any means without the written permission of Wasp Technologies.

The information contained in this document is subject to change without

notice.

Wasp is a trademark of Wasp Technologies. All other trademarks or registered trademarks are the

property of their respective owners.

Table of Contents

Chapter 1. 1Introduction..............................................................................

Chapter 2. 2Bar Code Symbologies............................................................

Chapter 3. Installation................................................................................3

Chapter 4. Quick Start ..............................................................................4

Chapter 5. WandReader Setup & Conguration ..................................5-28

1. Factory Default & Keyboard Connection....................6

2. Beep and Delay ......................................................7-8

3. Upper/Lower Case......................................................9

4. Keyboard Language ................................................10

5. Preamble/Postamble Conguration..........................11

6. Terminator/Code ID..................................................12

7. Enable/Disable Bar Code Symbologies..............13-14

8. Bar Code Symbology Settings............................15-27

Code 39 ..........................................................15

Interleaved 2 of 5 and Code 93 ......................16

Code 128 and UCC/EAN 128..........................17

MSI/Plessey ....................................................18

Codabar ..........................................................19

UPC-A..............................................................20

UPC-A Supplemental ......................................21

UPC-E..............................................................22

UPC-E Supplemental ......................................23

EAN-8 ..............................................................24

EAN-8 Supplemental ......................................25

EAN-13 ............................................................26

EAN-13 Supplemental ....................................27

Appendix A Bar Code Test Symbols....................................................28-30

Appendix B ASCII Table ......................................................................31-34

Appendix C Codes for PC ........................................................................35

Appendix D Technical Specications ........................................................36

Product Support ....................................................................37

Warranty ................................................................................37

Frequently Asked Questions..................................................38

Product specificaties

Merk:	Wasp
Categorie:	Barcode lezer
Model:	WLS9500
Kleur van het product:	Zwart
Gewicht:	76 g
Bluetooth:	Nee
Type beeldsensor:	Laser
Ingangsspanning:	5 V
Temperatuur bij opslag:	-20 - 60 °C
Maximumbereik:	0.73 m
Compatibele besturingssystemen:	- Windows 7\n- Windows Vista\n- Windows XP (SP3)\n- Windows Server 2003\n- Windows Server 2008
Golflengte:	650 nm
Stroomverbruik:	500 mA
Veiligheid:	FCC A, CE
Minimale systeemeisen:	- Pentium 4 (800 MHz)\n- 1 GB RAM\n- 2 GB HDD\n- 1024 x 768\n- USB\n- CD-ROM
Afmetingen (B x D x H):	150 x 22 x 29.6 mm
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Bereik kantelhoek:	45 - 90 °