Wasp WCS3900 Handleiding

Wasp Barcode lezer WCS3900

Bekijk gratis de handleiding van Wasp WCS3900 (41 pagina’s), behorend tot de categorie Barcode lezer . Deze gids werd als nuttig beoordeeld door 60 mensen en kreeg gemiddeld 3.6 sterren uit 30.5 reviews. Heb je een vraag over Wasp WCS3900 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/41

WCS 3900/3905

Programming Guide

Please Read

Note:

The Wasp WCS 3900 / 3905 Scanners are ready to scan

the most popular bar codes out of the box. This manual

should onl be used to make changes in they

configuration of the scanner for specific applications.

These scanners do not require software or drivers to

operate. The scanner enters data as keyboard data. Please

review this manual before scanning any of the programming

bar codes in this manual.

Tech Tip

If you are unsure of the scanner configuration or have

scanned the incorrect codes, please scan the default

bar code on page 6. This will reset the scanner to its

factory settings.

Check Version

Version 2.54

No part of this publication may be reproduced or transmitted in any form or

by any means without the written permission of Wasp Technologies. The

information contained in this document is subject to change without notice.

Wasp is a tr Wasp Technologies. All other trademarks or registered trademarks are theademark of

property of their respective owners.

Table of Contents

Chapter 1. Introduction ..............................................................................1

Chapter 2. Bar Code Symbologies............................................................2

Chapter 3. Installation................................................................................3

Chapter 4. Quick Start.............................................................................. 4

Chapter 5. Setup & Configuration ........................................................5-28

1. Factory Default & Keyboard Connection ....................6

2. Autosense Stand Mode ..............................................6

3. Beep and Delay ......................................................7-8

4. Upper/Lower Case......................................................9

5. Keyboard Language ................................................10

6. Preamble/Postamble Configuration ..........................11

7. Terminator/Code ID ..................................................12

8. Enable/Disable Bar Code Symbologies ..............13-14

9. Bar Code Symbology Settings ............................15-27

Code 39 ..........................................................15

Interleaved 2 of 5 and Code 93 ......................16

Code 128 and UCC/EAN 128..........................17

MSI/Plessey ....................................................18

Codabar ..........................................................19

UPC-A..............................................................20

UPC-A Supplemental / UPC-A to EAN-13 ......21

UPC-E..............................................................22

UPC-E Supplemental ......................................23

EAN-8 ..............................................................24

EAN-8 Supplemental ......................................25

EAN-13 ............................................................26

EAN-13 Supplemental ....................................27

Appendix A Bar Code Test Symbols ....................................................28-30

Appendix B ASCII Table 31-34

Appendix C Codes for PC 35

Appendix D Technical Specifications 36

Product Support ....................................................................37

Warranty ................................................................................37

Frequently Asked Questions..................................................38

Product specificaties

Merk:	Wasp
Categorie:	Barcode lezer
Model:	WCS3900
Kleur van het product:	Black, Yellow
Soort:	Draagbare streepjescodelezer
Connectiviteitstechnologie:	Bedraad
Type beeldsensor:	CCD
Werkafstand:	25.4 mm