Walrus Audio Voyager Handleiding

Bekijk gratis de handleiding van Walrus Audio Voyager (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Walrus Audio Voyager of wil je andere gebruikers van dit product iets vragen? Stel een vraag

*Only use a 9 volt DC, Center Negative, 100mA to power the pedal.

The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.

Daisy chain power supplies are not recommended.

Got questions or need a repair?

Email help@walrusaudio.com to talk with a real live human about your Walrus gear!

This product comes with a limited lifetime warranty.

Click Herefor more info.

The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from

the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From

its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any

playing style. At lower gain settings, it brightens the signal and adds clarity to each note. With the

gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing

while retaining the clarity needed to break through solos.

Bypass:Soft-touch, relay true bypass. Press the switch to

engage/disengage the pedal. LED indicates whether the

circuit is engaged or not.

Mid Switch:Turns the Mid-EQ circuit on/off. This is only active

when the bypass switch has been engaged. You can use this

to change your tone for specific sections of the song or when

pairing with other pedals.

Volume :Control the overall volume of the Voyager. Clockwise

increases volume, counter-clockwise decreases the volume.

Use to set “unity” after you get the gain you are wanting.

Tip: With the gain knob set at a lower setting, you can use the

pedal as a “clean” boost paired with the mid-EQ. Really nice

tone-shaping feature and pairs well with other drives.

CONTROLS

Product specificaties