WALI SWM402 Handleiding


Bekijk gratis de handleiding van WALI SWM402 (4 pagina’s), behorend tot de categorie luidsprekersteun. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.6 sterren uit 4 reviews. Heb je een vraag over WALI SWM402 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
INSTALLATION MANUAL
Speaker Wall Mount
SWM202 / SWM402 / SWM602
1-844-SATTLER (18447288537)
support@walielectric.com
www.walielectric.com
22.7kg/50lbs
RATED
2
SWM202
M6x12
Bolt
C (x2)
M5x12
Bolt
B (x4)
1/4 -20x1/2
Bolt
D (x2)
ST4.2X25
Screw
E (x4)
φ6X25
Anchor
F (x4)
Make sure that the supporting
surface will safely support the
combined load of the equipment
and all attached hardware and
components.
Make sure that mounting screws
are anchored into the center of the
studs. The use of an "edge to edge"
stud finder is highly recommended.
Tighten wood screws firmly but
do not overtighten. Over tightening
can damage the screws, greatly
reducing their holding power.
Use a stud finder to locate the edges of
the studs. Using an edge-to-edge stud
finder is highly recommended based on
their edges and drew a vertical line down
each stud's center.
Place metal wall plate on the wall as a
template. And mark the center of the two
mounting holes. Make sure that the
mounting holes are on the stud centerline.
Drill two 1/8" (3mm) dia. Holes 1" (25mm)
deep. Secure it using two screws
(part - ). Make sure that the wall plate
is level as shown in the figure.
E
E
Option A : Wood Stud Mounting
Supplied Parts List
3
Step 1
Step 2


Product specificaties

Merk: WALI
Categorie: luidsprekersteun
Model: SWM402

Heb je hulp nodig?

Als je hulp nodig hebt met WALI SWM402 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden