WAC Lighting JTK-104 Handleiding

Bekijk gratis de handleiding van WAC Lighting JTK-104 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over WAC Lighting JTK-104 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014

INSTALLATION INSTRUCTION

104 Voltage LED LinrTrack Luminaires

HT-104, LT-104, JT-104KKK (Available in LED)

CAUTION:

Read all instructions before installing.

Switch o power before installing or re-lamping.

Do not attempt to energize anything other than a track light xture.

All installation shall be in accordance with NEC and all local codes.

OVERVIEW:

Fixtures are designed for use on on WAC “L” , “H”, “J” series track.

They may also be used on other manufacturer’s brand of track

(consult factory for compatibility).

LAMPING:

1.Fixture is supplied with dimmable GU10 lamp. (LED Lamp included

when purchased as LED).

2. Insert lamp into the shade so the lamp pins protrude throughthe

back.

3.Place pins in the socket holes and twist 1/4” to the right.

The lamp should feel firmly seated.

4.Seat the lamp under the “V” spring of the gimbal ring.

FIXTURE INSTALLATION

1.Note the track has a groove running it’s length to indicate polarity.

2.Note the arrow on the locking tab.

3.Insert adapter into track slot and rotate it 90°. The arrow should

point to the grooved side of the track.

4.Make sure the locking tab seats in the track slot.

5.Removal is the reverse procedure. Track heads may be positioned

anywhere along the track length.

Push lamp into socket, then twist.

Seat lamp under the “V” spring

Product specificaties