WAC Lighting J-LED710 Handleiding

Bekijk gratis de handleiding van WAC Lighting J-LED710 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over WAC Lighting J-LED710 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014

INSTALLATION INSTRUCTION

Cartier LEDme® Track Luminaires

H-LED710, L-LED710, J-LED710

CAUTION

• For Use with WAC “J”, “J2”,”L”, & ”H” track systems. Fixture may also be used on other manufacturers’ brands of track. (Consult

factory for compatibility)

• Read all instructions before installing.

INSTALLATION ON TRACK:

Fixture Installation for J-LED710

1. Fixtures are designed for use on “J” series WAC Lighting track only. They may also be used on other manufacturers’ brands of

track. (Consult factory for compatibility)

Note: The track has a groove running its length to indicate polarity, and the locking tab has a slant for easy installation.

2. Insert adapter into track slot and rotate it 90°. The “P” contact and low side of the locking tab should point

to the grooved side of the tack.

3. Make sure the locking tab seats properly on the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

FIXTURE INSTALLATION FOR LLED710

1. Fixtures are designed for use on “L” series WAC Lighting track only. They may also be used on other manufacturers’ brands of

track. (Consult factory for compatibility).

Note: The track has a ridge running its length to indicate polarity, and the locking tab has a slant for easy installation.

2. Insert adapter into track slot and rotate it 90°, so that the low side of the locking tab faces the ridged side of the track.

3. Make sure the locking tabs seat properly in the track slot.

4. Reverse procedure to remove. Track heads may be positioned anywhere along the track.

Product specificaties