WAC Lighting H-1035N Handleiding

Bekijk gratis de handleiding van WAC Lighting H-1035N (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over WAC Lighting H-1035N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WAC Lighting

www.waclighting.com

Phone (800) 526.2588 • Fax (800) 526.2585

Headquarters/Eastern Distribution Center

44 Harbor Park Drive • Port Washington, NY 11050

Phone (516) 515.5000 • Fax (516) 515.5050

Western Distribution Center

1750 Archibald Ave • Ontario, CA 91761

Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. APRIL, 20151

INSTALLATION INSTRUCTION

Exterminator II LED Track Luminaires

H-1014/1035/1052, L-1014/1035/1052, J-1014/1035/1052

WARNING

IMPORTANT: NEVER attempt any work without shutting off the electricity.

- Read all instructions before installing.

- System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local

regulations.

- Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s) or

switch ”OFF” the circuit breaker switch(es) that control the power to the fixture or room that you are working on.

- Place the wall switch in the “OFF” position.

AVERTISSEMENT

IMPORTANT : Coupez l’électricité avant TOUTE manipulation.

- Lisez toutes les instructions avant d’installer.

- Système est destiné à être installé par un électricien qualifié en conformité avec le code national de l’électricité et les

règlements locaux.

- Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en

position d’arrêt (« OFF »).

- Placez l’interrupteur mural en position d’arrêt (« OFF »).

Overview:

Fixtures are designed for use on WAC Lighting’s track systems. They may also be used on other manufacturer’s brand of track

(consult factory for compatibility).

LED TRACK LUMINAIRETRACK SYSTEM

H-1014/H-1035/H-1052 Series120V H Track

L-1014/L-1035/L-1052 Series120V L Track

J-1014/J-1035/J-1052 Series120V J or J2 Track

Fixture installation for H/ L/ J Track: (1014) (Fig.1)

1. The track has a groove running its length to indicate polarity and the locking tab has an arrow indicating locking direction.

2. Insert adapter into track slot and rotate it 90°. The arrow should point to the grooved side of the track.

3. Press the locking tab on the adaptor and reverse the procedure to remove track fixture may be positioned anywhere

along the track.

Fig.1

locking tab

Product specificaties