VTech RM5752 Handleiding

Bekijk gratis de handleiding van VTech RM5752 (2 pagina’s), behorend tot de categorie Médialejátszó. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over VTech RM5752 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Overview

What’s in the box

RM5752

Wi-Fi 1080p Video Monitor

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news.

BC

Installation guide

What does HD Video Monitor do?

VTech Wi-Fi HD Video Monitor allows you to stay close to your baby when you are on the move

or away.

This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and

audio through the HD camera unit and 5-inch color screen parent unit. It allows you to maintain

a constant connection to your baby.

You can also monitor from your smartphone and mobile tablet.

VTech Wi-Fi HD Video Monitor uses MyVTech Baby 1080p app to let you instantly see and hear

what’s happening with your baby from anywhere in the world.

The app can be downloaded from the App Store or the Google Play

TM

Store, directly from your

smartphone or mobile tablet.

Congratulations

on purchasing your new VTech product. Before using this HD video monitor, please read

Important safety instructions.

For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, visit www.vtechcanada.com.

How the system works

1

Connect and charge the battery

Protect your privacy and

online security

FrequencyCamera unit: 2412 - 2462 MHz

Channels11

LCD5’’ Color LCD

(IPS 480x272 pixels)

Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may

vary according to environmental conditions at the time of use.

Power requirement1. Parent unit power adapter:

Output: 5V DC 1.5A

2. Parent unit: 3.7V Li-polymer battery

Camera unit power adapter:

Output: 5V DC 1500mA

Google Play and the Google Play logo are trademarks of Google LLC.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

Specifications are subject to change without notice.

© 2019 VTech Communications, Inc.

All rights reserved. 06/19. RM5752_IG_V3.0

Document order number: 91-011733-030-100

Technical specifications

Connect and charge the parent unit battery

Install the parent unit battery

The parent unit runs on rechargeable battery or AC power. To continuously

monitor your baby, keep the parent unit connected to AC power. With the

battery alone, the parent unit can cordlessly run for a short only.

• Use only the battery supplied with this product.

• If the parent unit will not be used for a long time, disconnect and remove the

battery to prevent possible leakage.

Replace the battery

To replace the battery, press down on the battery compartment cover and

pull it out, then follow the steps above to install the battery.

Raise the antenna of the parent unit

Requirements

Make sure your system includes the following components, and they meet the minimum

requirement.

NetworkWi-Fi

Wi-Fi router2.4GHz 802.11 b/g/n

Internet connection

1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per camera

MyVTech Baby 1080p mobile appConnect up to 10 camera units

Installation guideImportant safety

instructions

Quick start guide

Your HD video monitor package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

The Wi-Fi router (not included) provides Internet

connectivity to your HD video monitor system.

It serves as a communicating channel between

your camera unit and parent unit, allowing you

to monitor and/or control your camera unit

wherever you are.

VTech cares about your privacy and peace of mind. That’s why we’ve

put together a list of industry-recommended best practices to help

keep your wireless connection private and your devices protected

when online. We recommend you carefully review and consider

complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is

encrypted by selecting the “WPA2-PSK with AES” setting in your

router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name

(SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong

password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special

characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they

become available. This will ensure you always have the latest

security updates.

• If the feature is available, enable automatic updates for future

releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your

firewall by allowing other network devices to open inbound

ports without any intervention or approval from you. A virus or

other malware program could use this function to compromise

security for the entire network.

For more information on wireless connections and protecting your

data, please review the following resources from industry experts:

1. Federal Communications Commission: Wireless Connections and

Bluetooth Security Tips –

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a

New Computer to the Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-

safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-fi.org/discover-wi-fi/security.

Connect the baby monitor

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the camera unit are not connected to the switch

controlled electric outlets.

• Connect the power adapters in a vertical or floor mount position only. The adapters’

prongs are not designed to hold the weight of the parent unit and the camera

unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets.

Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the camera unit and the power adapter cords are out of

reach of children.

Connect the camera unit

• To maintain compliance with the FCC’s RF exposure guidelines, place the camera

unit at least 20cm from nearby persons.

1. Connect the power adapter to the camera unit and a power supply.

2. Slide the ON/OFF switch to ON to power on your camera.

• To turn off the camera, slide the ON/OFF switch to OFF.

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

Strangulation

Hazard

Keep this cord out of reach of children.

The cord needs to be at least three feet

away from the child at all times. Do not

use with an extension cord. Do not

remove this tag.

Éloignez ce cordon des enfants. Le

cordon doit se trouver à au moins trois

pieds d’un enfant et ce, en tout temps.

N’utilisez pas de rallonge. Ne retirez pas

cette étiquette.

Mantenga este cable fuera de la alcance

de los niños. Este cable debe estar por

lo menos tres pies fuera de la alcance

del niño en todo momento. No lo use

con una extensión inalámbrica. No quite

esta etiqueta.

Risque

d’étranglement

Riesgo de

estrangulación

Camera unit overview

1LED indicators

• Flash yellow and blue alternately when the

camera unit is in pairing mode.

• Yellow is steady on when the camera unit is

connecting to the Internet.

• Yellow and blue are steady on when the

camera unit is idle.

• Flash yellow and blue slowly during video

streaming.

• Flash yellow and blue quickly and alternately

when the camera unit is updating its firmware.

2Camera lens

3Infrared LEDs

• Allow you to see clearly in a dark surrounding.

4Light sensor

5Microphone

6PAIR button

• Press and hold for 3 seconds to enter pairing

mode.

• Press and hold for 20 seconds to reset the

camera settings to factory default.

7Speaker

Caution

• For hearing protection, do not stand close

to the HD camera when the camera’s alarm goes

off. The loud alarm may damage your hearing.

8Power jack

9Temperature sensor

10Wall mount holes for upright mounting

11

ON/OFF switch

12Wall mount holes for lateral mounting

Parent unit overview

1

LED light

• On when the parent unit is connected to

AC power, or the battery is charging.

• Flashes when the parent unit battery is

low and needs charging.

• Off when the parent unit is disconnected

from AC power.

2LINK LED light

• On when the parent unit is linked to the

camera unit.

• Flashes when the link to the camera unit

is lost.

3

LED light

• On when the parent unit volume is set

to off.

• On when the parent unit is talking to the

camera unit.

4TALK LED light

• On when the parent unit is talking to the

camera unit.

1

6

12

2

4

8

9

10

11

5

3

7

1

6

12

2

4

8

9

10

11

5

3

7

1

6

12

2

4

8

9

10

11

5

3

7

5LCD display

6Microphone

7LCD ON/OFF

8POWER

9

Lullaby

• Press to enter the lullaby menu.

10TALK

• Press and hold to talk to the camera unit.

11Arrow keys

• While in the submenu, press to exit.

, , or

• Press to move the selection box leftward,

upward, rightward or downward.

12MENU/SELECT

• Press to enter the menu.

• While in a menu, press to choose an

item, or save a setting.

13

Zoom in

14

Zoom out

15- / VOL / +

• Press to adjust the speaker volume.

16Power jack

17Antenna

18Speaker

19Battery compartment cover

20Stand

ESTE LADO HACIA ARRIBA

CE CÔTÉ VERS LE HAUT

model: IS057

modèle: IS057

Recharageable Li-ion Battery

3.7V 1900mAh 7.03Wh

Pile au lithium-ion rechargeable

3,7V 1900mAh 7,03Wh

1ICP5/54/57

Limited charge voltage: 4.2V

Tension de charge limitée: 4,2V

Battery Pack: BT290865

Bloc-piles:BT290865

MANUFACTURER:

ICON ENERGY SYSTEM (SHENZHEN) CO.,LTD.

FABRICANT:

ICON ENERGY SYSTEM (SHENZHEN) CO., LTD.

THIS SIDE UP

1

2

3

Press down on the battery

compartment cover to pull it out.

Make sure the label THIS SIDE

UP is facing up while inserting

the battery.

11

12

13

14

15

17

10

8

9

18

16

19

7

6

2

3

4

5

1

20

Product specificaties