Vollrath VP16 Handleiding
Vollrath
Vacuumverpakker
VP16
Lees hieronder de đź“– handleiding in het Nederlandse voor Vollrath VP16 (8 pagina's) in de categorie Vacuumverpakker. Deze handleiding was nuttig voor 4 personen en werd door 2.5 gebruikers gemiddeld met 4.7 sterren beoordeeld
Pagina 1/8
ENGLISH
Operator’s Manual
Item No. 26133-1 Rev 2/17/15
VACUUM PACKING MACHINE WITH DUAL 16" SEALING BARS
Thank you for purchasing this Vollrath Vacuum Packing machine. Before operating the equipment, read and familiarize yourself with
the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and
packaging. Use this packaging to ship the equipment if repairs are needed.
Item Model Description Voltage HZ Amps Plug
40833 VP16
Vacuum Packaging Machine with
Dual 16" Sealing Bars
120 60 13 5-20P
Safety PrecautionS
To ensure safe operation, read the following statements and understand their
meaning. This manual contains safety precautions which are explained below.
Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can cause
severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can cause minor
or major personal injury if the caution is ignored.
NOTICE is used to note information that is important but not hazard-related.
These precautions should be followed at all times. Failure to follow these
precautions could result in injury to yourself and others.
â– Unplug when not in use.
■Keep unit and power cord away from open ames, electric burners or
excessive heat..
â– Do not operate unattended.
â– Do not operate if unit has been damaged or is malfunctioning in any way.
function and PurPoSe
This unit is intended to vacuum seal food products in a commercial kitchen
environment. It is not intended for household, industrial or laboratory use.
OperatOr’s Manual
2
ENGLISH
inStallation
clearance requirementS
The minimum clearance is 6 inches (15 cm) on all sides of the machine and
30” (76.2 cm) inches above the machine.
Ambient temperature must be between 41-86 °F (5-30 °C). Never locate the
machine near a heat source. This can damage the lid.
1. Remove all packing material and tape, as well as any protective plastic
from the equipment.
2. Clean any glue residue left by the plastic or tape.
3. Place the vacuum pack machine on a at, level surface.
4. Check the oil gauge window on the side of the machine. Verify the oil
level is between the minimum and maximum îšżll lines.
NOTICE: Running the machine without oil or insufcient oil will
damage the machine and void the warranty.
5. Plug the power cord into a grounded electrical outlet that matches the
nameplate rated voltage.
NOTICE: Using a voltage other than the nameplate rated voltage will
cause damage to the unit. Incorrect voltage, modication
to the power cord or electrical components can damage
the unit and will void the warranty.
6. Run the Pump Conditioning program. See “Pump Conditioning Program”
on page 5.
overview
a
B
D
c
g
c
e
F
h
a
Lid - Seals the chamber during the vacuum cycle.
B
Chamber - Products are placed on the plate in the chamber
with the opening of the vacuum seal bag over the seal bar.
c
Seal Bar - Seals the vacuum bag.
D
Control Panel - Selects and programs functions.
e
Oil Filler Plug - Access point for adding oil to pump.
F
Oil Inspection Window and Oil Drain - View oil quality and
quantity.
g
Seal Pad - Provides counter-pressure on the sealing bar
h
Lid Retainer - Holds lid closed when machine is not in use.
control Panel
a
B
c
D F
i J
e g
kh
a
Program Display - Shows the selected program.
B
Program Button - Selects the program.
c
Reprogram Button - Enter Program Mode.
D
Function Select Button - Selects functions in programming
mode.
e
Function Display - Shows the value of the active function.
F
Increase Value / Stop Button - During a packing cycle,
stops the current function and continues to the next step in
the program. In programming mode, increases the time or
pressure of the selected function.
g
Vacuum Gauge - Shows the pressure in the vacuum
chamber. A reading of -1 bar is the equivalent of 99% vacuum.
h
Pump Conditioning Program Button - Activates the Pump
Conditioning Program.
i
Function LEDs - The LED illuminates when the function is
active during the cycle or when the function is selected in
programming mode.
J
Decrease Value / Vacuum Stop Button - During a packing
cycle, interrupts all functions and cancels the cycle. In
programming mode, decreases the time or pressure of the
selected function.
k
On/Off Button - Turns the machine On and Off.
function deScriPtionS
The machine includes the following functions:
â– Vacuum Pressure % - Sets vacuum to reach a set pressure.
â– Vacuum Plus - Used in conjunction with Vacuum Pressure. Extends the
vacuum cycle to enable air trapped in the product to escape the bag.
â– H2O Liquid Sensor Control - Senses the moment liquids from the
product start to boil, stops the vacuum extraction and moves to the next
step. This prevents the product from dying out, losing weight and leaking
out of the vacuum bag. Product leaked from the bag can contaminate the
seal and chamber, and corrode the vacuum pump.
â– H2O Plus - Similar to Vacuum Plus. Extends the vacuum cycle to enable
air trapped in the product to escape the vacuum bag.
â– Vacuum Time - Sets the vacuum to run for a set number of seconds.
â– Sealing Time - Sets the duration of the sealing function. Thicker bags
require longer sealing time.
â– Soft-Air - Sets the rate at which air re-enters the chamber. Longer time
allows the vacuum bag to slowly form itself to the product to protect
delicate products or prevent sharp product edges from damaging the
bag.
Product specificaties
| Merk: | Vollrath |
| Categorie: | Vacuumverpakker |
| Model: | VP16 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vollrath VP16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vacuumverpakker Vollrath
10 Juni 2025
9 Juni 2025
9 Juni 2025
Handleiding Vacuumverpakker
- Vacuumverpakker Adler
- Vacuumverpakker Techwood
- Vacuumverpakker Trebs
- Vacuumverpakker Neff
- Vacuumverpakker Silvercrest
- Vacuumverpakker Buffalo
- Vacuumverpakker Luvele
- Vacuumverpakker Gemini
- Vacuumverpakker Anova
- Vacuumverpakker Tefal
- Vacuumverpakker Henkelman
- Vacuumverpakker Clatronic
- Vacuumverpakker Ziploc
- Vacuumverpakker ProfiCook
- Vacuumverpakker G3 Ferrari
Nieuwste handleidingen voor Vacuumverpakker
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025