Vollrath 40848 Handleiding


Bekijk gratis de handleiding van Vollrath 40848 (8 pagina’s), behorend tot de categorie Pizzaoven. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over Vollrath 40848 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
Item No. 2350046-1 en Rev 01/11
ENGLISH
Operators Manual
PIZZA/BAKE OVEN
Thank you for purchasing this Vollrath Counter Top Cooking Equipment. Before operating the equipment, read and familiarize yourself with
the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and
packaging. Use this packaging to ship the equipment if repairs are needed.
Item Description Voltage Watts (Amps) Plug
40848 Pizza/Bake Oven 208 - 240 2,800 (11.6 Amps) 6-15P
OperatOr s anual M
2
Unpacking the qUipment and nitial etUp e i S
When no longer needed, dispose of all packaging and materials in an
environmentally responsible manner.
1. Remove all packing material and tape, as well as any protective plastic
from the equipment.
2. Clean any glue residue left over from the plastic or tape.
3. Place the equipment in the desired position and height.
NOTE:
There must be a minimum of 4” (10 cm) between the equipment
and any surrounding walls. The surrounding walls must be made
of noncombustible materials. The equipment must be installed in
accordance with local re and building regulations.
4. Plug the equipment into a properly grounded electrical supply matching
the nameplate rating. Damage to the equipment can occur if incorrect
power is supplied to equipment.
FeatUreS and ontrolS c
E
C
B
A
D
D
F
Figure 1. Features and Controls.
A
TIMER. Timer can be set for 1 - 15 minutes. The timer is not connected
to thermostat.
B
THERMOSTAT CONTROL dial. Used to set or adjust the temperature
of the oven. The numbers on the dial correspond with the oven
temperature. The “0” position is off.
C
PILOT LIGHT. This light indicates that the oven is heating. Once the
set temperature has been reached the light will go out. Equipment will
continue to maintain heat and temperature with the light cycles on and
off. This light is not a power “on” indicator.
D
CERAMIC COOKING DECK. The cooking/baking surface.
E
DOOR HANDLE. Used to open and close the oven.
F
DOOR. Oven door.
S paFety recaUtionS
To ensure safe operation, read the following statements and
understand their meaning. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that cause can
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that or will can
cause personal injury or property damage if the caution is minor
ignored.
NOTE
Note is used to notify people of installation, operation, or
maintenance information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the equipment:
Use only grounded electrical outlets matching the nameplate rated
voltage.
Have equipment installed by a qualied personnel in accordance with
local codes and ordinances.
Use equipment in a at, level position.
Do not use an extension cord with this equipment. Do not plug this
equipment into a power strip or multi-outlet power cord.
Unplug equipment, turn off and let it cool before cleaning or moving.
Do not spray controls or outside of equipment with liquids or cleaning
agents.
Do not clean the equipment with steel wool.
Keep equipment and power cord away from open ames, electric
burners or excessive heat.
Do not operate unattended.
Do not operate equipment in public areas and/or around children.
The equipment may be hot, even though the pilot light is not on.
Do not operate if equipment has been damaged or is malfunctioning in
any way.
F pUnction and UrpoSe
This equipment is intended to be used for cooking pizza and bread products
in direct contact with ceramic decks. It is not intended for household,
industrial or laboratory use.
Before using this equipment it must be cleaned and dried thoroughly.
This equipment is a medium duty appliance capable of a wide variety of
pizza/bake applications. The temperature is thermostatically controlled. The
temperature range is 140°F (60°C) and 750°F (399°C). The thermostat is
also the ON / OFF switch. An indicator lamp adjacent to the thermostat dial
indicates when the elements are heating.
3
ENGLISH
OperatOr s anual M
operation
WARNING
Burn Hazard.
Do not touch hot food, liquid or heating surfaces
while equipment is heating or operating.
Hot surfaces and food can burn skin. Allow the hot surfaces to cool
before handling. Do not drop or spill water onto the cooking surface
as it can spray or splatter.
Before initial use burn-in procedure:
1. Check that the ceramic decks (D) are clean and dry. See Figure 1.
2. Turn the thermostat control (B) to 400°F (204°C) for 45 minutes to 1 hour
with the oven door (F) open. You will notice odor appearing due to the
ceramic deck (cooking/baking surface) burning-in. This is normal.
3. Close the door (F) and turn the thermostat control (B) 500°F (260°C).
Run the oven for 2 hours.
Pizza and Baking Instructions and Tips:
Follow the cooking/baking instructions provided on pre-made pizza and other
food products.
The temperature range required for pizza baking is usually higher than for
general baking. Ideally pizza should cook at approximately 500°F (260°C) to
575°F (301°C).
The pizza should be allowed to bake until the cheese bubbles and the
bottom crust is brown.
1. Always ensure that the food products or pizza crust is fully defrosted
before baking.
2. Rotation of the pizza during the baking cycle is highly recommended.
3. Pizza with a heavy topping will require a longer baking time at a lower
temperature.
4. Cook food products in desired manner.
cleaning
To maintain the appearance and increase the service life, clean your
equipment daily.
WARNING
Burn Hazard.
Do not touch hot food, liquid or heating surfaces
while equipment is heating or operating.
Hot surfaces and food can burn skin. Allow the hot surfaces to cool
before handling. Do not drop or spill water into the cooking surface
as it can spray or splatter.
NOTE:
Do not use water to clean the ceramic decks.
1. Unplug the equipment.
2. Allow the equipment to cool completely before cleaning.
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the equipment. Liquid inside the equipment
could cause an electrical shock.
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical
shock. Do not use equipment if power cord is damaged or has been
modied
NOTE:
Do not immerse the cord, plug or equipment in water or
any other liquid.
3. Using a damp cloth, sponge dipped in soapy water to clean the outside
of the equipment.
4. Use towels completely dry the equipment or allow to air dry completely.
The spillage on the ceramic decks should be cleaned periodically. Generally
this can be scrapped out but for hard to clean spillage the following is
recommended :
1. Turn the unit to the maximum temperature for 30 minutes.
2. Allow the unit to cool down.
3. Brush the residue from the deck.
The oven door may be removed for cleaning.
To remove and install the oven door:
1. Allow the equipment to cool completely before removing the door.
2. Open the door (B). See Figure 2
3. Note the down or back position of hinge locks (E). Check that both sides
are in this position.
D
E
A
B
C
Figure 2. Oven Door and Hinge Lock (down or back position).
4. Place the hinge lock (E) over the hinge arm (D) as shown. Repeat on
both sides. See Figure 3.


Product specificaties

Merk: Vollrath
Categorie: Pizzaoven
Model: 40848

Heb je hulp nodig?

Als je hulp nodig hebt met Vollrath 40848 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden