Vital Tech MB-395B Handleiding


Bekijk gratis de handleiding van Vital Tech MB-395B (3 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 7 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over Vital Tech MB-395B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/3
MB-395B user manual
Introduction
Thank you for using our company's products , in order to enable you to operate the speaker as easy as
possible. Please read this manual carefully before you begin to use it.
The Speaker is a fashion portable wireless bluetooth speaker with water proof designed, This speaker
can bear the rain.,it is very suitable for outdoor travel. Support bluetooth 5.0 protocol, support for
smartphones, tablets, notebooks that with bluetooth audio equipment , allowing you to completely get rid
of a wire harness restraint, freely enjoy music , and without bluetooth mobile phones, notebook
Points for attention
*Do not hit or crush it seriously.
*Do not contact benzene, diluent and other chemicals.
* Do not use near by strong magnetic field or electric field.
* Avoid direct rays or heating appliances.
* Do not disassemble, repair or modify.
* Do not listen at large volume for long periods of time, so as not to injure the hearing.
*Do not clean the speaker with water and don't immerse the speaker in the water. This speaker only has
water pray prevention function. If use the speaker not by the right way and cause any quality problems,
not support warranty. Kindly note above!. Please clean the speaker with a slightly damp cloth.
* when using cycling, driving a car or motorcycle, Please don't stand in the rain for a long time
* when using at low voltage, it may cause distortion of sound and please charge it in time.
* Bluetooth is compatible with common smart phones and tablets, but depending on the device or
application you use, may not be able to support a particular feature.
Buttons information with Interface:
1. Long press Off/on, short press switch modes to Bluetooth and Aux
2. 1. short press to pause/ tell ,pause/ play; 2.Long press to cancel or set-up TWS function
3.Double click last No to redial, short press pause/ play; When incoming call, short press
answer/hang up , long press reject
3. song/ up Short press to song, long press t volumeprevious volume previous o up
4. Next song /volume Short press to next song, long press to volumedown down
5. Dc 5V Charger interface
6. AUX in
Bluetooth mode
1 Bluetooth version: Bluetooth 5.0, supports HSP,HFP,A2DP protocol, with English prompt voice, and
bluetooth device name BT SPEAKER
2 Press switch button (2 seconds),on or off. After the opening, speaker makes a prompt voice, the blue
light flashes quickly, and the speaker goes into bluetooth mode.
3 The blue light flashes by quick into the matching state and the phone searches for the name of the BT
SPEAKER device to connect. If you need the password, enter it(0000), when the connection is
successful the blue light is always bright and speaker indicate a successful sound. The blue light flashes
slowly during the music playing . Once the paired phone turns on bluetooth and then automatically
reconnects the speakers.
AUX In mode
1. Insert AUX In automatically into AUX In mode and the blue light flashing by
How to set-up TWS function:
Power on two same speakers at same time. And make sure the two same speakers are in bluetooth mo
de. Two same speakers will pair bluetooth each other automatically. You will hear indication voice "Don
g" around 3 seconds later. It means TWS function set-up successfully. If want to cancel or set-up TWS f
unction again, just keep pressing the Play/Pause button 3 seconds
Charging
1 Plug the USB cable into the speaker connect to the 5V charger or computer to charge the speaker
2 When charging, the "charging" red indicator light on when it is full the red light is out.
Other
1. The default volume of the speaker is 2/3 of the total volume .To protect battery life and speakers work,
so the software Settings when the battery voltage is lower than 3.3 V speakers will automatically detect
the concurrent give out sound prompt alarm, when battery voltage is lower than 3.3 V the speaker
makes a voice prompt and set up automatic shutdown meantime.
2. When the speaker standstill, the speaker will power off automatically if not use the speaker 10
minutes. If need play again ,needs to power on the speaker again.
List of key functions
Buttons
Mode
_
+
Bluetooth
mode
1. short press to pause/ play;
2.Long press to cancel or set-up
TWS function 3.Double
click last No to redial, short press
pause/ play; When incoming call,
short press answer/hang up , long
press reject
Long press to on/off ,
short press switch modes
(when switching mode,
needs to be inserted into
the audio line otherwise
it will not be valid).
Short press to
previous song,
long press to
down volume
Short press to next
song, long press to
up volume
AUX IN
Short press to pause/ play
Short press to switch
mode
Long press to
down volume
Long press to up
volume
Specification parameters:
MB-395B 1.Bluetooth Version: Chip :JLV5.0
2.Bluetooth Range:15 meters
3.Output power:RMS 10W( 5W*2 ) 4.Driver Size:52 mm *
2pcs 5.Frequency response:100 Hz-20 KHZ
6.Built-in battery:1800mAh/3.7V 7.Sensitivity:84±2 dB
8.Signal to noise ratio: 65 dB 9.Distortion:1%
10.Charge time :2.5-3.5H
11. waterproof IPX7 12. Function : Hands-free
call/AUX /BLUETOOTH/ TWS Function/TF/USB
product size:75*75*150mm
Package Includes
1: Speaker x 1 pcs
2:Micro USB Charging Cable x1 pcs
3: Attach line of the speaker x1 pcs
4: User Manual x 1 pcs


Product specificaties

Merk: Vital Tech
Categorie: Speaker
Model: MB-395B

Heb je hulp nodig?

Als je hulp nodig hebt met Vital Tech MB-395B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden