SoundTube SS-Q-6 Handleiding

Bekijk gratis de handleiding van SoundTube SS-Q-6 (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over SoundTube SS-Q-6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SS-110 Page, SS-110B & SS-Q-6

OWNER’S MANUAL

© 2026 SoundTube Ent. Rev. 03.02.2026

360º of the Best Sound Around™

Contact: SoundTube, 855.663.5600 / 913.663.5600 / [email protected]

Plse read the following instructions carefully before instaing eall

your Soundsphere

®

speaker. If you have any questions

regarding installation tt are not answered in the following ha

directions, plse contact your local sound contractor or the ea

Soundsphere

®

technicasupporteam.l t

Max Power:

110B: 30 Watts RMS

Q6: 30 Watts RMS

110 Page: 60 Watts RMS

SS-HK Hanging Kit

Hang Mounting om Abovefr

Attach as shown in Dgm 1iara

.

a) Hold the main hook above so the res and 3 hooks wlwiil

be straight as they are clipped on the speaker.

b) Iert the sing clips to the ket holes as shown.nsprinbrac

Attach the top clip to the mounting pot inmaking sure ttha

the clips and cable are not twisted.

SS-MBS Mounting Bracket

Preparing the Speaker

Prepare the speaker as shown in or Diagram 2

Diagram 3

and .Diagram 4

outs. rem wh a 1/ dr t ideFlaingshcanbeovedit4”illbi

( y nchDiagram 2),oritcaneasilbepued through ing a us

m (hamerDiagram 3).Ifsi ung a 1/ dr ; r4”illbitbecaeful not

rrspeakerwill not itall consectly.

b) Pce the stop nut in the lapocket as shown in Dgm 4iara.

Start rew through oude e, through stop nut sctsihol

contained in the pocket, and slightly beyd the oninterior

he ().olDg5iaram

HK

SPRING CLIPS

Diagram 1

Diagram 2

STRIKE FIRMLY

REFLECTOR

KNOCK OUT

FLASHING

Diagram 3

Diagram 4

Diagram 5

Installing the Speaker

The steel bracket is pre-fastened to the ceiling or wall, then the

speaker is placed on the bracket and secured in the following

steps ():Diagram 6, Diagram 7

a) Fasten the bracket in the desired location, making

sure that it is properly and safely mounted.

one end of the installed bracket.

c) While holding the screw side against the surface, tighten

SS-DCB Ceiling T-Bar Mounting

Two Caddy Twist Clips and Twist Nuts are provided for connecting

to suspended ceiling T-bars. Please refer to the enclosed Caddy

Clip T-bar mounting instructions for more details ().Diagram 6

a) Place the clips about 8 3/4” apart on the T-bar. Check

to be sure they have snapped on the bar correctly.

the mounting bracket. Tighten the thumb nuts securely.

c) Secure the speaker per , “Installing the steps b and c

Speaker”.

TWIST CLIP

T-BAR

MOUNTING

BRACKET

CEILING

SCREW IN

REFLECTOR

Diagram 6

Diagram 7

Product specificaties