Velleman vdl20st Handleiding

Velleman Effect machine vdl20st

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman vdl20st (13 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

VDL20ST

STROBOSCOPE 20 W

STROBOSCOOP 20 W

STROBOSCOPE 20 W

ESTROBOSCOPIO 20 W

STROBOSKOP 20 W

USER MANUAL 2

GEBRUIKERSHANDLEIDING 4

NOTICE D’EMPLOI 6

MANUAL DEL USUARIO 8

BEDIENUNGSANLEITUNG 10

VDL20ST Rev. 03

13.11.2009 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be

returned to your distributor or to a local recycling service. Respect the local environmental

rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQPower! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Indoor use only.

Keep the stroboscope away from rain, moisture, splashing and dripping liquids.

Protect the device against extreme heat and dust. Never put objects filled with liquid

on top of the device.

Risk of electroshock during installation.

Touching live wires can cause life-threatening electroshocks. Wait 5 minutes after

disconnecting the stroboscope from the mains before handling the device. Make sure not

to make contact with the mains plug contacts after disconnection.

DO NOT disassemble or open the cover(s).

Keep out of reach of children and unauthorized users or users with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instructions concerning use of the

appliance by a person responsible for their safety. Children should be supervised

to ensure that they do not play with the device.

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

• A qualified technician should install and service this device.

• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect

the device against damage by leaving it switched off until it has reached room temperature.

• This device falls under protection class II. It is therefore essential that the device be earthed. Have a

qualified person carry out the electric connection.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of this

manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if

necessary.

• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the

plug only.

• There may be some smoke or a particular smell when the device is activated for the first time. This is

normal and any smoke or smell will gradually disappear.

• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.

• Note that damage caused by user modifications to the device is not covered by the warranty.

• Do not operate the stroboscope without or with a cracked glass pane. Have it replaced when it is

damaged.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

• This stroboscope should only be used indoors with an alternating current of max. 230 VAC ~ 50 Hz.

• Do not shake the device. Avoid brute force when installing or operating the device.

• Select a location where the device is protected against extreme heat, dust and moisture. Respect a

minimum distance of 0.5 m between the device’s light output and any illuminated surface.

VDL20ST Rev. 03

13.11.2009 ©Velleman nv

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by

unqualified people. Any damage that may occur will most probably be due to unprofessional use of the

device.

• Use the original packaging if the device is to be transported.

• All modifications of the device are forbidden for safety reasons.

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,

electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the

warranty.

4. Installation

• The installation construction should be able to support a minimum point load of 10 times the weight of

the device.

• The installation must always be secured with a secondary attachment e.g. a safety cable (VDLSC7 or

VDLSC8).

• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified

technician check the device once a year and once before you bring it into service.

• Overhead mounting requires extensive experience: calculating workload limits, determining the

installation material to be used… Have the material and the device itself checked regularly. Do not

attempt to install the device yourself if you lack these qualifications as improper installation may result

in injuries.

• The installation has to be approved by an expert before the device is taken into service.

• The glass pane has to be replaced when it is damaged.

5. Use

1. Connect the stroboscope to the mains.

2. Set the flash frequency (0 to 10 flashes per second) by means of the knob at the rear.

3. Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.

6. Maintenance

1. All screws should be tightened and free of corrosion.

2. The housing, the glass pane, the mounting supports and the installation location (e.g. ceiling,

suspension, trussing) should not be deformed, modified or tampered with.

3. The electric power supply cables must not show any damage. Have a qualified technician maintain the

device.

4. Disconnect the device from the mains prior to maintenance activities.

5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

6. There are no user-serviceable parts. Only authorized dealers may maintain and service this device.

7. Technical Specifications

power supply max. 230 VAC ~ 50 Hz

power consumption 20 W

dimensions 85 x 125 x 53 mm

total weight 240 g

lamp LAMP20ST (20 W)

Use this device with original accessories only. Velleman nv cannot be held responsible in the

event of damage or injury resulted from (incorrect) use of this device. For more info

concerning this product, please visit our website www.hqpower.eu. The information in this

manual is subject to change without prior notice.

This manual is copyrighted. The copyright to this manual is owned by Velleman nv.

All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced

to any electronic medium or otherwise without the prior written consent of the copyright holder.

Product specificaties

Merk:	Velleman
Categorie:	Effect machine
Model:	vdl20st
Kleur van het product:	Zwart
Gewicht:	240 g
Aantal lampen:	1 lampen
Vermogen lamp:	20 W
Ingangsspanning:	230 V
Frequentie:	50 Hz
Afmetingen (B x D x H):	85 x 35 x 130 mm