Velleman EBL Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Velleman EBL (4 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
EBL 1 PEREL
EBL – BIKE LED LIGHT SET
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EBL! Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer.
2. Headlight Installation
1. Open the headlight by turning the front part in an anticlockwise direction. Remove the front part and take out the
battery holder. Install 4 x AAA batteries (not incl.) respecting the polarity. Slide the battery holder back into the
headlight body, the groove in the holder downwards. Close the headlight.
2. Install the bracket onto the bike’s handlebars and fasten tightly with the screw. Slide the headlight onto the
bracket until you hear a clicking sound.
3. To remove the headlight, slide the headlight forward while pressing the unlock button at the rear of the bracket.
3. Taillight Installation
1. 2 x AAA batteries (not incl.)
2. screwdriver (not incl.)
3. taillight bracket
4. seat post bracket
Push the red button to activate the taillight. Push
again to choose one of the 6 desired patterns.
The information in this manual is subject to change without prior notice.
Fig. 1
Fig. 2
EBL 2 PEREL
EBL – KIT D’ÉCLAIRAGE À LED POUR BICYCLETTE
1. Introduction
Aux résidents de l'Union européenne
Des informations environnementales importantes concernant ce produit
Ce symbole sur l'appareil ou l'emballage indique que l’élimination d’un appareil en fin de vie peut polluer
l'environnement.
Ne pas éliminer un appareil électrique ou électronique (et des piles éventuelles) parmi les déchets
municipaux non sujets au tri sélectif ; une déchèterie traitera l’appareil en question.
Renvoyer les équipements usagés à votre fournisseur ou à un service de recyclage local.
Il convient de respecter la réglementation locale relative à la protection de l’environnement.
Si vous avez des questions, contactez les autorités locales pour élimination.
Nous vous remercions de votre achat ! Lisez attentivement la présente notice avant la mise en service de l'appareil.
Si l’appareil a été endommagé pendant le transport, ne l'installez pas et consultez votre revendeur.
2. Installation du phare avant (voir ill. 1)
1. Ouvrir le phare avant en tournant la partie antérieure dans le sens contraire des aiguilles d’une montre. Retirer la
partie antérieure et ôter le porte-piles. Installer 4 piles type R03 (non incl.) en respectant la polarité. Glisser le
porte-piles dans le phare en plaçant l’entaille vers le bas. Refermer le phare avant.
2. Installer le support de montage sur le guidon de la bicyclette et serrer la vis. Glisser le phare avant sur le support
jusqu’à ce qu’il se clipse en place.
3. Pour retirer le phare, pousser le phare vers l’avant en poussant la languette de déblocage à l’arrière du support.
3. Installation du feu arrière (voir ill. 2)
1. 2 piles type R03 (non incl.)
2. tournevis (non incl.)
3. support de montage pour feu arrière
4. support de montage autour de la tige de selle
Enfoncer le bouton rouge pour activer le feu arrière. Renfoncer pour choisir un des 6 modes d’éclairage désiré.
Toutes les informations présentées dans cette notice peuvent être modifiées sans notification préalable.
EBL – LED LICHTSET VOOR FIETS
1. Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen,
dit toestel schade kan toebrengen aan het milieu.
Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een
gespecialiseerd bedrijf terechtkomen voor recyclage.
U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen.
Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering.
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd het toestel
beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.
EBL 3 PEREL
2. Monteren van de koplamp (zie fig. 1)
1. Open de koplamp door het frontstuk tegen de wijzers van de klok in te draaien. Verwijder het frontstuk en de
batterijhouder. Installeer 4 x AAA-batterijen (niet meegelev.) en respecteer de polariteit. Glijd de batterijhouder
terug in de koplamp, de groef naar beneden. Sluit de koplamp.
2. Installeer de montagebeugel op het stuur van de fiets en maak vast door middel van de schroef. Glijd de koplamp
op de montagebeugel tot de lamp zich vastklikt.
3. Verwijder koplamp door deze van de montagebeugel te glijden terwijl u op het lipje achteraan de beugel drukt.
3. Monteren van het achterlicht (zie fig. 2)
1. 2 x AAA-batterijen (niet meegelev.)
2. schroevendraaier (niet meegelev.)
3. montagebeugel achterlicht
4. montagebeugel zadelstang
Druk op de rode knop om het achterlicht in te schakelen. Druk opnieuw om Ă©Ă©n van de 6 flitsmodi te kiezen.
De informatie in deze handleiding kan te allen tijde worden gewijzigd zonder voorafgaande kennisgeving.
EBL – JUEGO CON LUCES DE BICICLETA
1. IntroducciĂłn
A los ciudadanos de la UniĂłn Europea
Importantes informaciones sobre el medio ambiente concerniente este producto
Este símbolo en este aparato o el embalaje indica que, si tira las muestras inservibles, podrían dañar el
medio ambiente.
No tire este aparato (ni las pilas eventuales) en la basura doméstica; debe ir a una empresa especializada
en reciclaje. Devuelva este aparato a su distribuidor o a un lugar de reciclaje local.
Respete las leyes locales en relaciĂłn con el medio ambiente.
Si tiene dudas, contacte las autoridades locales para eliminaciĂłn.
¡Gracias por haber comprado el ! Lea cuidadosamente las instrucciones del manual antes de usarlo. Si el EBL
aparato p3-ha sufrido algún daño en el transporte no lo instale y póngase en contacto con su distribuidor.
2. Instalar la luz delantera (véase fig. 1)
1. Abra la luz delantera al girar la parte frontal en sentido contrario a las agujas del reloj. Quite la parte frontal y
saque el portapilas. Introduzca 4 pilas AAA (no incl.) respetando la polaridad. Vuelva a deslizar la tapa del
portapilas poniendo la ranura hacia abajo. Vuelva a cerrar el faro.
2. Instale el soporte de montaje en el manillar de la bicicleta y apriete el tornillo. Deslice la luz delantera sobre el
soporte hasta que oiga un clic.
3. Para quitar la luz delantera, deslícela hacia adelante al empujar la lengüeta de desbloqueo hacia atrás.
3. Instalar la luz trasera (véase fig. 2)
1. 2 pilas AAA (no incl.)
2. destornillador (no incl.)
3. soporte de montaje para la luz trasera
4. soporte de montaje alrededor de la barra del sillĂ­n
Pulse el botĂłn rojo para activar la luz trasera. Vuelva a pulsar para seleccionar uno de los 6 modos de iluminaciĂłn.
Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso.


Product specificaties

Merk: Velleman
Categorie: Zaklamp
Model: EBL

Heb je hulp nodig?

Als je hulp nodig hebt met Velleman EBL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Velleman

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp