Velleman 3DPEN Handleiding

Velleman Niet gecategoriseerd 3DPEN

Lees hieronder de 📖 handleiding in het Nederlandse voor Velleman 3DPEN (31 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/31

3DPEN

3D PRINTING PEN

3D-PEN

STYLO 3D

BOLÍGRAFO 3D

3D-STIFT

USER MANUAL 3

GEBRUIKERSHANDLEIDING 7

MODE D'EMPLOI 12

MANUAL DEL USUARIO 17

BEDIENUNGSANLEITUNG 22

3DPEN

V. 01 07/08/2014 2 ©Velleman nv –

3DPEN

V. 01 07/08/2014 3 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that

disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as

unsorted municipal waste; it should be taken to a specialized

company for recycling. This device should be returned to

your distributor or to a local recycling service. Respect the local

environmental rules.

If doubt, contact your local waste disposal authorities. in

Thank you for choosing Velleman! Please read the manual thoroughly

before bringing this device into service. If the device was damaged in

transit, do not install or use it and contact your dealer.

2. Safety Instructions

Persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge,

should not use this appliance unless they have been given

supervision or instruction concerning the use of the

appliance by a person responsible for their safety.

Children sh l be supervised to ensure that they do not play al

with the appliance.

For educational purposes only! To be used under the direct

supervision of an adult.

Indoor use only. Keep this device away from rain,

moisture, splashing and dripping liquids.

Always disconnect mains power when the device is not in

use. Handle the power cord by the plug only.

Product specificaties

Merk:	Velleman
Categorie:	Niet gecategoriseerd
Model:	3DPEN
Kleur van het product:	Blue,White
Gewicht:	65 g
Breedte:	187 mm
Diepte:	43 mm
Hoogte:	31 mm
AC-adapter ingangsspanning:	12 V
Soort voeding:	AC
Breedte mondstuk:	- mm
Printmateriaal:	ABS
Ondersteunde filamentdikte:	1.75 mm
Maximale extrudertiptemperatuur:	250 °C