Vaxcel Wellington T0738 Handleiding

Bekijk gratis de handleiding van Vaxcel Wellington T0738 (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Vaxcel Wellington T0738 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 1 / 3

231102

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

Hardware Package (included):

Mounting Screw (B)Wire Connector (C)Bolt Nut (D)

Rubber Pad (E)

Crossbar Unit (A)

T0738

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read

and save these instructions.

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

WARNING: Turn off the main power at circuit breaker before installing fixture.

Installation steps

Turn off the power at fuse or circuit box.

1. Unscrew the big finial from the fixture.

2. Unscrew the finial from the screw of the backplate and do not remove the rubber pad-A.

3. Place the small hole of the arm on the screw and secure with the finial. Align the big hole of the arm and the hole

of the top of the fixture and secure with the big finial.

4. Tighten the finial and the big finial.

Wire Connector (C)

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Fixture Mounting Screw

Crossbar Unit (A)

Fixture Wire

Fixture Ground Wire

Backplate

Rubber Pad-A

Photocell

Bolt Nut (D)

Rubber Pad (E)

Max. 60W Type A Bulb

(not included)

Fixture

Screw

Finial

Arm

Big Finial

Product specificaties