Vaxcel Mission T0444 Handleiding

Bekijk gratis de handleiding van Vaxcel Mission T0444 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.0 sterren uit 4 reviews. Heb je een vraag over Vaxcel Mission T0444 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Pull out the outlet wires and grounding wire from the post. Make wire connections

using the wire nuts:

---The black wire from the fixture to the black wire from the post.

---The white wire from the fixture to the white wire from the post.

---The grounding wire from fixture to the grounding wire from the post.

Carefully tuck the wires back into the post.

2. Place the fixture on the post, then secure it with the set screws.

3. Install a bulb (not included). See relamping label at socket area or packaging for

maximum allowed wattage.

4. Thread the nipple into the holes of the cap, then secure it with a hex nut.

5. Attach the cover onto the cap by inserting the nipple, then secure it with the finial.

6. Attach the cap onto the fixture, then secure it with two screws.

7. Turn on the power at the main fuse or circuit breaker box.

Grounding Wire

Fixture Wire

Wire Nut

Post

Hex Nut

Nipple

Cap

Cover

Dry Wall Screw

Fixture

Screw

Finial

060118

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.

OP37295/OP14695

Product specificaties