Vaxcel OW35053 Handleiding

Bekijk gratis de handleiding van Vaxcel OW35053 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over Vaxcel OW35053 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.

OW24963 / OW35653 / OW35053

Installation Steps:

Bolt Nut

Fixture

Mounting Screw

Headless Screw

Fixture Wire

Lock Nut-1

Lock Nut-2

050725

Cross Bar

House Grounding Wire

Green Grounding Screw

Fixture Grounding Wire

Wire Nut

Wall Box

Back Plate

1. Thread two headless screws to the cross bar, and then secure with four

lock nuts-1.(You can adjust the length of the screws if necessary.)

2. Attach the cross bar to the wall box by using two mounting screws.

3. Hook the iron to the loop, and then attach the iron to the back plate by

using the set screw and the lock nut-2.

4. Make wire connections with Wire Nut:

---The black wire from fixture to the black wire from power source.

---The white wire from fixture to the white wire from power source.

---Attach the fixture grounding wire to the cross bar with the green grounding

screw. Then connect it to the house grounding wire with the wire nut.

Carefully tuck wires back into the wall box.

5. Attach the back plate to the cross bar by inserting the headless screws, and

then secure with the bolt nuts.

6. Install a bulb. (Please do not exceed the maximum capacity that is

recommended on the package.)

7. Turn on the power at fuse or circuit box.

Set Screw

Loop

Iron

Product specificaties