Valcom VE8090R Handleiding

Bekijk gratis de handleiding van Valcom VE8090R (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Valcom VE8090R of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1 947558

ISSUE 1

VE80R 90

IP INTERCOM CONTROLLER

INTRODUCTION

The VE8090R SIP Intercom Controller provides

access to Valcom VoIP audio endpoints from SIP

(Session Initiation Protocol) telephone servers.

The SIP Intercom Controller can communicate

with the SIP telephone server as either registered

SIP stations or as a SIP trunk. The SIP Intercom

Controller supports up to four concurrent calls for

any combination of talkback intercom or group

paging per call. Two FXS ports are available to

facilitate POTS telephones, Loop Start Trunk or

FXO port access. The VE8090R is designed for

rack mounting.

SPECIFICATIONS

Access Methods

Session Initiation Protocol (SIP)

PBX, FXO Port

POTS telephone set

Features

-45 for network connection RJ

2 RJ-11 telephone connections

4 Relays with Form C contacts

Front panel activity LED

Network activity LEDs

2.5mm jack for external power

Power over Ethernet (PoE) 802.3af

compatible

Dimensions/Weight

 1 Standard 19” Rack Unit

 1.72” H x 16.50" W x 1188." D

.1(4.36cm H x 41.91cm W x 308cm D)

 Weight: 4.0 lbs. (1. kg) 81

Environment

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Nominal Specications

Input Impedance: 600 Ohms

Input Level: -10dBm

Output Impedance: 600 Ohms

Output Level: - 10dBm nominal

Relay Current: 1 AMP @ 24VDC

Ringer Voltage 42VRMS@20Hz

Ringer equivalency (REN) 0.8A

Nominal Power Requirements

Via rear panel barrel connector:

Voltage: 24VDC

Current: 325mA

Via 802.3af (PoE) Ethernet Switch:

802.3af: Class 3

These products are intended for use with a UL

Listed power source marked “Class 2” or “LPS”

rated 24VDC, or 48VDC (PoE).

PoE and all interconnected ITE are intended for

intra-building.

Precautionary Designations

WARNINGTo Reduce The Risk Of Fire :

Or Electric Shock.Do Not Expose This

Apparatus To Rain Or Moisture.

AVERTISSEMENT: An de réduire les

risques d'incendie ou de décharge

électrique, évitez d'exposer le système à

la pluie ou à l'humidité.

Apparatus shall not be exposed to

dripping or splashing and no objects

lled with liquids, such as vases, shall be

placed on the apparatus.

L’appareil ne doit pas être exposé à des

égouttements et éclaboussures et

aucun Objet Rempli de liquide, comme

vase, ne doit être placé sur l’appareil.

Product specificaties