V-Tac VT-3042-3 Handleiding

Bekijk gratis de handleiding van V-Tac VT-3042-3 (2 pagina’s), behorend tot de categorie Ventilator. Deze gids werd als nuttig beoordeeld door 87 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over V-Tac VT-3042-3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WARNING:

• The input voltage for this fan should be 220V, 50Hz

• Electrical installation should be performed by a qualified electrician.

• To reduce the risk of electric shock, ensure electricity has been turned off before assembling

or disassembling. The assembling wire order must be Ground wire, live (supply) wire /neutral

wire, and the disassembling wire order should be neutral wire/ live (supply) wire, ground wire.

• Make sure all assembled screws were tight during the assembling.

• To reduce the risk of injury, do not touch the blade when the fan is running.

• The appliance is not intended to be used by children under the age of 8. It can be used by

children over the age of 8, as long as they are given continuous supervision.

• This appliance is not intended to be used by persons with reduced physical, sensory, or

mental capabilities, or lack of experience or knowledge, unless they have been given supervi-

sion or instruction concerning the use of the appliance in a safe way by a person responsible

for their safety, and understand the hazards involved.

• Supervise young children to make sure that they do not play with the appliance. Close super-

vision is necessary when the appliance is being used by or near children.

• Keep the appliance and its cord out of reach of children under the age of 8.

• Do not try to repair the appliance by yourself. Contact the official Technical Support Service

for advice.

• Cleaning and maintenance must be carried out according to this instruction manual to make

sure the appliance functions properly. Turn off and unplug the appliance before cleaning it.

• Proper grounding should be ensured throughout the installation.

• Installation should only be done by a certified electrician.

Product specificaties