Uline H-1457 Handleiding
Pagina's 9 Ventilator
Bekijk de handleiding van Uline H-1457 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PAGE 1 OF 9 0625 IH-1421
INDUSTRIAL WALL
MOUNT FAN
1-800-295-5510
uline.com
H-1421, H-1422
H-1456, H-1457
PARTS
HARDWARE
Fan Head x 1
Support Arm x 1Wall Mount Bracket x 1
5/16"-18 x 1"
Hex Screw x 2
5/16" Flat
Washer x 2
5/16" Lock
Washer x 2
5/16"
Hex Nut x 2
1/2"-13 x 1"
Hex Bolt x 1
1/2" Lock
Washer x 1
1/2"-13
Hex Nut x 1
1/4"-20 x 1"
Hex Nut x 1
5/8" Flat
Washer x 1
1/4" Lock
Washer x 1
1/4"-20
Hex Nut x 1
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
PAGE 2 OF 9 0625 IH-1421
SAFETY
WARNING! To reduce risk of fire and electrical
shock, do not use this fan with a solid state
speed control device. Plug unit into properly
rated service outlet.
WARNING! To reduce the risk of fire, electrical
shock or injury to persons: Do not use
replacement parts that have not been
recommended by the manufacturer (e.g.
parts made at home using a 3D printer).
• Always unplug unit for cleaning. Wipe with damp
cloth and mild detergent.
• Always unplug when not in use.
• Always unplug when moving fan from one location
to the next.
• Do not allow unit to become wet or damp.
• Do not add oil. Motor is permanently lubricated.
• Do not put foreign objects through fan guards into
blade.
• Do not operate any fan with a damaged cord or
plug. Discard fan or return to an authorized service
facility for examination and/or repair.
• Do not run cord under carpeting.
• Do not cover cord with throw rugs, runners or similar
coverings.
• Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it
will not be tripped over.
INSTALLATION
NOTE: Mounting hardware is not included.
1. Use wall mount bracket as template to mark four
holes on mounting surface. (See Figure 1)
2. Use appropriate-sized drill bit to drill holes through
marks on mounting surface.
NOTE: It is recommended to use a minimum of
grade 5 fasteners.
3. Attach wall mount bracket to mounting surface. The
following are acceptable surfaces for wall mount
assembly:
Wood – Surface should be a minimum of 1" thick.
Drill four holes at pre-marked locations using 5/32"
drill bit. Use four 1/4" wood screws of appropriate
length (minimum 1") to mount wall mount assembly.
Steel – Drill four holes at pre-marked locations
using a 9/32" drill bit. Attach wall mount assembly
to mounting surface using 1/4"-20 hex screws of
appropriate length, 1/4" flat washers, 1/4" lock
washers and 1/4"-20 hex nuts.
Concrete – Use a 1/4" expansion type bolt or
1/4" masonry lag with shield. Drill four holes at
pre-marked locations using appropriate-sized drill
bit as recommended for fastener.
Figure 1
Wall Mount
Bracket
PAGE 3 OF 9 0625 IH-1421
INSTALLATION CONTINUED
4. Assemble support arm to wall bracket using one
5/16"-18 x 1" hex screw, four 5/16" hex nuts, three 5/16"
lock washers and two 5/16" flat washers. Securely
tighten fastener assembly. Support arm should be
secure to wall bracket, but still capable of swiveling
horizontally within wall bracket. (See Figure 2)
5. With wall mount securely attached to wall, attach
fan head to wall mount by placing the bracket on
bottom side of motor over support arm. Align with
large mounting hole and fasten using 1/2"-13 x 1"
hex bolt, 1/2" lock washer and 1/2"-13 hex bolt.
(See Figure 3)
6. Align smaller, crescent-shaped mounting hole and
fasten using 1/4"-20 x 1" hex bolt, 5/8" flat washer,
1/4" lock washer and 1/4"-20 hex nut. (See Figure 4)
7. Securely tighten all nuts and bolts.
Figure 2
5/16"-18 x 1" Hex Screw
5/16" Hex Nut
5/16" Flat Washer
5/16" Flat
Washer
Figure 3
1/2"-13 Hex Nut
1/2" Lock
Washer
1/2"-13 x 1" Hex Bolt
Bracket
Support Arm
Figure 4
1/4"-20 x 1" Hex Bolt
5/8" Flat Washer
1/4" Locking Washer
1/4"-20 Hex Nut
1
-800-295-551
0
une.comli
Product specificaties
| Merk: | Uline |
| Categorie: | Ventilator |
| Model: | H-1457 |
Heb je hulp nodig?
Als je hulp nodig hebt met Uline H-1457 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden