Uline H-309 Handleiding

Bekijk gratis de handleiding van Uline H-309 (3 pagina’s), behorend tot de categorie Nietmachine. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Uline H-309 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PAGE 1 OF 30424 IH-308

H-308, H-309

INDUSTRIAL

PLIER STAPLER

1-800-295-5510

uline.com

CAUTION! Read instructions carefully before

operating plier. Save for future reference.

WARNING! Keep fingers away from staple

discharge area when operating or clearing

a jam.

NOTE: H-309 contains pointed blade.

Use extra care when handling.

NOTE: RequiresS-1480 or S-1481 staples.

TO LOAD:

1. Pull up and out until

magazine cover is open

as far as it will go.

(See Figure 1)

2. Squeeze plier closed and

insert staple stick through

loading guide (rear end

first). (See Figure 2)

3. Let front end of stick

drop in. Ensure it drops

in completely. Push

magazine cover closed

until it clicks, which

indicates it is completely

closed. (See Figure 3)

TO CLEAR A JAM:

Grasp plier as if ready to staple. Insert a pencil or similar

object between clincher arm and magazine, away from

staple discharge area. Operate plier once or twice to

expel jammed staples.

NOTE: Do not pry with screwdriver or similar

tool, as damage to magazine may occur.

TO DISASSEMBLE:

WARNING! Do not disassemble core assembly,

as compressed pusher spring and retainer may

fly off, causing eye injury.

1. Remove lever pin and operating lever.

2. Remove loading guide by squeezing in on sides.

3. Remove magazine cover by disengaging front from

pusher and then pulling it out.

4. Squeeze driver tips together with pliers until

disengaged from driver arm.

5. Swing driver arm open and remove drive bearings.

6. Remove magazine spring from clincher arm spring.

7. Disengage front tabs of clincher arm spring from

clincher arm. Remove clincher arm spring. Push

retainer rear leg out from under magazine. Lift out

assembly of core, pusher, pusher spring and retainer.

#DESCRIPTION

1Driver Arm

2Clincher Arm

3Operating Lever

4Magazine

5Core

6Pusher

7Pusher Spring

8Retainer

9Pivot Pin

H-309

10

2

5

1761311

1

12

7

14

4

215

389

16

#DESCRIPTION

10Driver

11Clincher Arm Spring

12Magazine Spring

13Drive Bearing

14Magazine Cover

15Lever Pin

16E-Ring

17Loading Guide

PARTS

OPERATION

Figure 2

Figure 1

Figure 3

Para Español, vea página 2.

Pour le français, consulter la page 3.

Product specificaties