Tripp Lite SmartPro SMART1524ET Handleiding

Tripp Lite UPS SmartPro SMART1524ET

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro SMART1524ET (56 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
1
Owner’s Manual
UPS Systems
Models: SMART1524ET and SMART1548ET
(Series Number: AG-88E6, AG-88E5)
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBARÂź
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA ‱ tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Este manual esta disponible en español en la pågina de Tripp Lite: tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com
20-10-334 93-397B.indd 1
20-10-334 93-397B.indd 1
20-10-334 93-397B.indd 1
20-10-334 93-397B.indd 120-10-334 93-397B.indd 1 11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM11/4/2020 10:09:44 AM
2
Table of Contents
Important Safety 3
Instructions
UPS Location Warnings 3
UPS Connection Warnings 3
Equipment Connection Warnings 3
Battery Warnings 4
UPS and Battery Recycling 4
Introduction 5
System Architecture 5
Package Contents 6
Optional Accessories 6
User Supplied Items 6
Features 7
UPS Front Panel 7
Mounting 10
2-Post Rack Mounting the UPS 10
4-Post Rack Mounting the UPS 10
Desktop Mounting the UPS 11
Wiring the UPS 12
AC Input and Output Wiring 12
External Battery Connections 13
(Deep-Cycle Lead-Acid
Batteries Only)
Additional Wiring Connections 14
(Optional)
Operation 15
Basic On/Off and Manual 15
UPS Test VeriïŹcation
Operating the LCD / LED 17
Control Panel
LCD Menu Tree 18
LCD Menu Overview 18
LCD Menu Explanations 19
RS-232 / USB Communications 26
Interface
HyperTerminal Set Up 26
RS-232 / USB Main Menu 30
RS-232 / USB Menu Tree 31
Menu Overview 31
Troubleshooting 45
Alarm and Fault Messaging 45
UPS Alarm Messages 46
Battery Back-Up Time 49
Internal Fan Relacement 50
Fan Replacement 50
Fan Filter Replacement 52
Storage and Service 53
Product Registration 53
Regulatory Compliance 54
20-10-334 93-397B.indd 2
20-10-334 93-397B.indd 2
20-10-334 93-397B.indd 2
20-10-334 93-397B.indd 220-10-334 93-397B.indd 2 11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM11/4/2020 10:09:44 AM
3
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, maintenance and storage of the UPS and
batteries. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
‱ Install your UPS within an enclosure or location that protects against excessive
moisture, conductive contaminants, dust or direct sunlight.
‱ For best UPS performance, maintain site temperature between -40ÂșF and 176ÂșF
(-40ÂșC and 80ÂșC).
‱ Leave adequate space around all sides of the UPS for proper ventilation.
‱ Only set the UPS upright on a sturdy ïŹ‚at surface. Do not block fans or ventilation
holes, as this will seriously inhibit the unit’s internal cooling and cause product
damage not covered under warranty.
UPS Connection Warnings
‱ Hardwire the UPS directly to a properly grounded power source.
‱ If the UPS receives power from a motor-powered AC generator, the generator must
provide clean, ïŹltered, computer-grade output.
‱ The mains power that supplies power to the UPS should be easily accessible and
located near the UPS.
Equipment Connection Warnings
Install in accordance with National Electrical Code standards ANSI/
NFPA 70 and Canadian Electrical Code, Part I, C22.1.
Short-circuit backup protection and overcurrent protection is provided
by the building installation.
To reduce the risk of ïŹre, connect only to a circuit provided with
branch circuit overcurrent protection in accordance with the National
Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code,
Part I, C22.1. Be sure to provide a disconnect device in the end use
installation.
‱ Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment or to
signiïŹcantly affect its safety or effectiveness is not recommended.
‱ Do not connect surge protectors or extension cords to the output of your UPS. This
might damage the UPS and may affect the surge protector and UPS warranties.
20-10-334 93-397B.indd 3
20-10-334 93-397B.indd 3
20-10-334 93-397B.indd 3
20-10-334 93-397B.indd 320-10-334 93-397B.indd 3 11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM
11/4/2020 10:09:44 AM11/4/2020 10:09:44 AM


Product specificaties

Merk: Tripp Lite
Categorie: UPS
Model: SmartPro SMART1524ET
Kleur van het product: Zwart
Gewicht: 14700 g
Breedte: 400 mm
Diepte: 240 mm
Hoogte: 133.1 mm
Gewicht verpakking: 15600 g
Breedte verpakking: 388.6 mm
Diepte verpakking: 586.7 mm
Hoogte verpakking: 246.4 mm
Gebruikershandleiding: Ja
Materiaal behuizing: Staal
LED-indicatoren: Ja
Vormfactor: Rackmontage
Ingebouwde ventilator: Ja
Land van herkomst: Taiwan
Aantal USB 2.0-poorten: 1
Certificering: UL1778:2014 (5th Ed) R10.17; CLASS A; 47 CFR FCC PART 15 SUBPART B:2017; ICES-003:2017; CAN/CSAC22.2 No. 107.3-14 (3rd Ed)+GI1; Series
Geluidsalarm(en): Ja
Uitgangsvermogen: 1200 W
Accu/Batterij oplaadtijd: 4 uur
Temperatuur bij opslag: -15 - 50 °C
Frequentie: 50/60 Hz
Luchtvochtigheid bij opslag: 5 - 95 procent
Power factor: 0.7
Type koeling: Actief
Seriële poort(en): 1
Stekker: NEMA 5-15P
Efficientie: 96 procent
(Buitenste) hoofdverpakking hoogte: 246.4 mm
(Buitenste) hoofdverpakking breedte: 388.6 mm
(Buitenste) hoofdverpakking brutogewicht: 15600 g
(Buitenste) hoofdverpakking lengte: 586.7 mm
Hoeveelheid per (buitenste) hoofdverpakking: 1 stuk(s)
Rackcapaciteit: 3U
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 95 procent
Type beeldscherm: LCD
Surge energy rating: 480 J
Aantal AC uitgangen: 6 AC-uitgang(en)
Stopcontacttypes: NEMA 5–15R
Stroom (max.): 12 A
Rekbevestigingspakket: Ja
Output power capacity: 1.5 kVA
Ingang operation voltage (min): 24 V
Ingang operation voltage (max): - V
Uitgang operation voltage (min): 120 V
Uitgang operation voltage (max): - V
UPS-topologie: Line-interactive
Aantal input fases: 1
Typische backup tijd op halve lading: 20 min
Typische backup tijd op volledige lading: 7 min
Hot-swap batterij: Ja
Output frequentie: 60 Hz
EMI/RFI geluidsfiltering: Ja
Golfvorm: Sinus
Koude start: Ja
Automatic Voltage Regulation (AVR): Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SmartPro SMART1524ET stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding UPS Tripp Lite

Handleiding UPS

Nieuwste handleidingen voor UPS