Tripp Lite SmartPro SMART1000LCDU Handleiding

Tripp Lite UPS SmartPro SMART1000LCDU

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro SMART1000LCDU (24 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Owner’s Manual

Digital UPS System

SMART1000LCDU

Not suitable for mobile applications.

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

All trademarks are the property of their respective owners.

Important Safety Instructions 2

Quick Installation 3

Basic Operation 4

Storage & Service 7

Product Registration 8

Español 9

Français 17

15-06-324-9334A3.indb 1 8/6/2015 4:23:08 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the

installation, operation and storage of all Tripp Lite UPS Systems. Failure to heed

these warnings may affect your warranty.

UPS Location Warnings

• The UPS is designed for indoor use only in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Leave adequate space around all sides of the UPS for proper ventilation.

• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in

this manner will seriously inhibit the unit’s internal cooling, eventually causing product

damage not covered under warranty.

UPS Connection Warnings

• Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into

itself; this will damage the UPS.

• Do not modify the UPS’s plug, and do not use an adapter that would eliminate the UPS’s

ground connection.

• Do not use extension cords to connect the UPS to an AC outlet.

• If the UPS receives power from a motor-powered AC generator, the generator must provide

clean, filtered, computer-grade output.

Equipment Connection Warnings

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

• Do not connect surge suppressors or extension cords to the output of your UPS. This might

damage the UPS and may affect the surge suppressor and UPS warranties.

Battery Warnings

• Your UPS does not require routine maintenance. Do not open your UPS for any reason. There

are no user-serviceable parts inside.

• Batteries can present a risk of electrical shock and burn from high short-circuit current.

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or

batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the

UPS before performing battery replacement. Use tools with insulated handles. There are no

user-serviceable parts inside the UPS. Battery replacement should be performed only by

authorized service personnel using the same number and type of batteries (Sealed Lead-

Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or visit

http://www.tripplite.com/support/recycling-program for recycling information. Tripp Lite offers a

complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the

Web at http://www.tripplite.com/products/battery-finder/ to locate the specific replacement

battery for your UPS.

• Do not attempt to add external batteries to the UPS.

UPS and Battery Recycling

Please recycle Tripp Lite Products. The batteries used in Tripp Lite products are sealed

Lead-Acid batteries. These batteries are highly recyclable. Please refer to your local

codes for disposal requirements.

You can call Tripp Lite for recycling info at 1-773-869-1234.

You can go the Tripp Lite Website for up-to-date information on recycling the batteries or any

Tripp Lite product. Please follow this link: http://www.tripplite.com/support/recycling-program/

15-06-324-9334A3.indb 2 8/6/2015 4:23:08 PM

Quick Installation

STEP 1: Place the UPS in either a horizontal (“desktop”) or vertical (“tower”) position.

The LCD screen can be rotated so it’s readable when the UPS is in either a vertical or horizontal

position. To rotate the screen: carefully insert a small tool in the slots on the sides of the screen

to pop it out of the UPS housing; rotate the screen, and snap it back into the UPS housing.

CAUTION: To safely balance the UPS when it is placed in a vertical (“tower”) position,

make sure the LCD screen is located at the top of the front panel.

STEP 2: Plug the UPS into an outlet.

After plugging the UPS into a wall outlet, push the ON/OFF button for one second to turn the

UPS on (see Basic Operation section).

Note: The UPS will not turn on automatically in the presence of live utility power.

STEP 3: Plug your equipment into the UPS.

Select outlets (see diagram) will provide battery backup and surge protection; plug your

computer, monitor and other critical devices here.* Select outlets (see diagram) will provide

surge protection only; plug your printer and other nonessential devices here.

* Your UPS is designed to support electronic equipment only. You will overload the UPS if the total wattage

ratings for all the equipment you connect to the Battery Backup Protected/Surge Protected outlets exceeds the

UPS’s Output Capacity. To find your equipment’s wattage ratings, look on their nameplates. If the equipment is

listed in amps, multiply the number of amps by 120 to determine watts. (Example: 1 amp × 120 = 120W).

If you are unsure if you have overloaded the Battery Backup Protected/Surge Protected outlets, run a self-test

(see “MUTE/TEST” Button description).

CAUTION: The UPS must be plugged into a live AC outlet and turned on for 24 hours

after initial installation to fully charge the UPS’s internal battery. Your connected

equipment will receive utility-supplied AC power (if present) immediately after the UPS is

plugged in and turned on; however, your connected equipment may not receive full

battery backup in the event of a blackout or severe brownout until the UPS’s internal

battery is fully charged.

15-06-324-9334A3.indb 3 8/6/2015 4:23:08 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	UPS
Model:	SmartPro SMART1000LCDU
Kleur van het product:	Zwart
Gewicht:	7030 g
Breedte:	93 mm
Diepte:	183.9 mm
Hoogte:	300.7 mm
Snoerlengte:	1.8 m
Gewicht verpakking:	7260 g
Breedte verpakking:	264.2 mm
Diepte verpakking:	396.2 mm
Hoogte verpakking:	121.9 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Vormfactor:	Tower
USB-poort:	Ja
Meegeleverde kabels:	Phone (RJ-11),USB cable
Land van herkomst:	China
Aantal USB 2.0-poorten:	1
Geluidsalarm(en):	Ja
Duurzaamheidscertificaten:	RoHS,ENERGY STAR
Uitgangsvermogen:	500 W
Accu/Batterij oplaadtijd:	20 uur
Temperatuur bij opslag:	-15 - 50 °C
Frequentie:	60 Hz
Luchtvochtigheid bij opslag:	0 - 95 procent
Modem (RJ-11) poort:	1
Stekker:	NEMA 5-15P
Efficientie:	98 procent
(Buitenste) hoofdverpakking hoogte:	281.9 mm
(Buitenste) hoofdverpakking breedte:	266.7 mm
(Buitenste) hoofdverpakking brutogewicht:	15010 g
(Buitenste) hoofdverpakking lengte:	391.2 mm
Hoeveelheid per (buitenste) hoofdverpakking:	2 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Type beeldscherm:	LCD
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332189896
Surge energy rating:	1038 J
Aantal AC uitgangen:	8 AC-uitgang(en)
Stopcontacttypes:	NEMA 5–15R
Stroom (max.):	12 A
Output power capacity:	1 kVA
Ingang operation voltage (min):	120 V
Ingang operation voltage (max):	120 V
Uitgang operation voltage (min):	115 V
Uitgang operation voltage (max):	120 V
Typische backup tijd op halve lading:	10 min
Typische backup tijd op volledige lading:	3 min
Hot-swap batterij:	Ja
Hoorbare alarmstanden:	Fault,Low battery alarm,Battery replacement
EMI/RFI geluidsfiltering:	Ja
Golfvorm:	Sinus
Koude start:	Ja
Automatic Voltage Regulation (AVR):	Ja