Tripp Lite PDU3V6H50A Handleiding

Tripp Lite Stekkerdoos PDU3V6H50A

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDU3V6H50A (36 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

Owner’s Manual

3-Phase Metered and Basic

Power Distribution Units

Important Safety Insructions 2

Installation 3

Digital Load Meter 6

Features 7

Service 8

Warranty and Product Registration 9

Español 10

Français 19

Pyccкий 28

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

PDU3MV6L2120

(Series Number: AGPD8414)

PDU3MV6L2120LV

(Series Number: AGPD8414)

PDU3MV6L2120B

(Series Number: AGPD8414)

PDU3MV6L2130

(Series Number: AGPD8415)

PDU3MV6H50

(Series Number: AGPD8416)

PDU3MV6H50A

(Series Number: AGPD8417)

PDU3XMV6G20

(Series Number: AGPD8420)

PDU3XMV6L2220

(Series Number: AGPD8420)

PDU3MV6L2130A

(Series Number: AG-00E3)

PDU3V6H50

(Series Number: AGPD8416)

PDU3V6H50A

(Series Number: AGPD8417)

PDU3V6L2120LV

(Series Number: AGPD8414)

PDU3V6L2130

(Series Number: AGPD8415)

PDU3XV6G20

(Series Number: AGPD8420)

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

20-09-045-933145.indb 1

20-09-045-933145.indb 120-09-045-933145.indb 1 10/7/2020 11:55:08 AM

10/7/2020 11:55:08 AM

10/7/2020 11:55:08 AM10/7/2020 11:55:08 AM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during

the installation, operation, and storage of this product. Failure to heed these

instructions and warnings may affect the product warranty.

• The PDU provides convenient multiple outlets, but it DOES NOT provide surge or line noise

protection for connected equipment.

• The PDU is designed for indoor use only in a controlled environment away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• The power requirement for each piece of equipment connected to the PDU must not exceed

the individual outlet’s load rating.

• The total power requirement for equipment connected to the PDU must not exceed the

maximum load rating for the PDU.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to modify the PDU, including the input plugs and power cables.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

• Never attempt to install electrical equipment during a thunderstorm.

• Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C).

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• Do not attempt to open the PDU; there are no user-serviceable parts inside.

• The PDU must be installed by a qualiﬁed technician only.

• Install in accordance with National Electrical Codes. Be sure to use the proper over current

protection for the installation, in accordance with the plug rating/equipment rating.

• The electrical sockets supplying power to the equipment shall be installed near the equipment

and be easily accessible.

20-09-045-933145.indb 2

20-09-045-933145.indb 220-09-045-933145.indb 2 10/7/2020 11:55:08 AM

10/7/2020 11:55:08 AM

10/7/2020 11:55:08 AM10/7/2020 11:55:08 AM

1-1 1-3

1-4

1-2

1-5

Installation

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of conﬁguration, the user must

determine the ﬁtness of hardware and procedures before mounting. The PDU and included hardware are

designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact

mounting conﬁgurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the

PDU are included. Use only the screws supplied by Tripp Lite, or their exact equivalent.

1-1 Attach the mounting

brackets to the PDU.

1-2 (Optional) Attach the

cord retention

bracket(s) to the PDU.

1-3 For toolless mounting,

position the PDU as

desired in the rack

enclosure, align the

buttons with the rack

mounting slots, and

slide the PDU into

position.

1-4 To install the PDU with its outlets facing

the rear of the rack, use the included

PDUMVROTATEBRKT accessory. First,

attach the mounting button A to the

V-shaped bracket B using the included

screw and washer. Then, use the

button-mount slot to attach the bracket

to the PDU and the mounting button to

attach the PDU to the rack. The bracket

effectively repositions the mounting

brackets, allowing for the PDU outlets to

face the rear of the rack.

1-5 If your PDU cannot be mounted

using the toolless mounting option,

the mounting brackets can be used.

Attach the PDU to a vertical rail in

your rack or rack enclosure. (Use the

mounting hardware that came with your

rack or rack enclosure to attach the

mounting brackets to the rail.)

20-09-045-933145.indb 3

20-09-045-933145.indb 320-09-045-933145.indb 3 10/7/2020 11:55:09 AM

10/7/2020 11:55:09 AM

10/7/2020 11:55:09 AM10/7/2020 11:55:09 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDU3V6H50A
Kleur van het product:	Zwart
Gewicht:	6440 g
Breedte:	55.9 mm
Diepte:	67.3 mm
Hoogte:	1778 mm
Snoerlengte:	1.83 m
Gewicht verpakking:	10020 g
Breedte verpakking:	254 mm
Diepte verpakking:	1968.5 mm
Hoogte verpakking:	154.9 mm
Soort:	Driefasig
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
Aan/uitschakelaar:	Ja
Land van herkomst:	Taiwan
Certificering:	TAA
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-30 - 60 °C
Luchtvochtigheid bij opslag:	5 - 95 procent
Naleving van duurzaamheid:	Ja
Hoogte, in bedrijf:	0 - 3000 m
Maximaal vermogen:	14400 W
Montage:	Verticaal
Stekker:	CS8365C
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	0U
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	45 AC-uitgang(en)
Nominale input voltage:	208 V
Stopcontacttypes:	C13 coupler, C19 coupler, NEMA L6-30R
Stroom (max.):	40 A
PDU types:	Basis
Rekbevestigingspakket:	Ja
Netspanning, in bedrijf:	208 V