Tripp Lite PDUMVR30NET Handleiding

Tripp Lite Stekkerdoos PDUMVR30NET

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUMVR30NET (36 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

Owner’s Manual

Single-Phase 0U Switched

Power Distribution Units with

Individual Outlet Current Metering

PDUMVR20NET • PDUMVR30NET • PDUMVR30HVNET

(AG-0044) (AG-0045) (AG-0046)

Important Safety Instructions 2

Installation 3

Digital Load Meter 8

Features 8

Conﬁguration and Operation 11

Service 11

Warranty and Product Registration 12

Español 13

Français 25

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

16-10-211-933668.indb 1 12/22/2016 11:36:07 AM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during

the installation, operation, and storage of this product. Failure to heed these

instructions and warnings may affect the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualiﬁed technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended.

16-10-211-933668.indb 2 12/22/2016 11:36:07 AM

1-2

1-1

1-3 1-4

Installation

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of conﬁguration, the user must

determine the ﬁtness of hardware and procedures before mounting. The PDU and included hardware are designed

for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting

conﬁgurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the PDU are

included. Use only the screws supplied by the manufacturer, or their exact equivalent.

If installing the PDU in a rack that has button-mount slots, you only need to perform steps for

toolless mounting (step 1-1 ). If your rack does not have button-mount slots, proceed to step

1-2.

Toolless Mounting

1-1 Attach the included mounting buttons

to the PDU. Position the PDU as desired

in the rack enclosure, align the buttons

with the rack mounting slots, and slide

the PDU into position.

Note: To install the PDU with its outlets

facing the rear of the rack, use the included

PDUMVROTATEBRKT accessory. This V-shaped

bracket provides a mounting button on one leg

of the V and a button-mount slot on the other,

effectively repositioning the mounting buttons.

See Features section for image.

Regular Mounting

1-2 Attach the mounting brackets to the

PDU.

1-3 Attach the cord retention (Optional)

bracket(s) to the PDU.

1-4 Attach the PDU to a vertical rail in your

rack or rack enclosure. Use the included

mounting hardware to attach the

mounting brackets to the rail.

PDUMVR30HVNET Shown

16-10-211-933668.indb 3 12/22/2016 11:36:12 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDUMVR30NET
Kleur van het product:	Zwart
Gewicht:	4600 g
Snoerlengte:	3 m
LED-indicatoren:	Ja
Beeldscherm:	LCD
Certificering:	UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico)
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-15 - 50 °C
Hoogte, in bedrijf:	0 - 3000 m
Afmetingen (B x D x H):	56 x 52 x 1780 mm
Montage:	Verticaal
Stekker:	NEMA L5-30P
Rackcapaciteit:	0U
AC-ingangsfrequentie:	50 - 60 Hz
Aantal AC uitgangen:	24 AC-uitgang(en)
Nominale input voltage:	100-127 V
Stopcontacttypes:	NEMA 5–15, NEMA 5–20R
Stroom (max.):	30 A
PDU types:	Geschakeld
Netspanning, in bedrijf:	100-127 V