TP Link Archer MX700 Handleiding

Bekijk gratis de handleiding van TP Link Archer MX700 (2 pagina’s), behorend tot de categorie Router. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over TP Link Archer MX700 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Installation Guide

Wireless 4G LTE Router

1. Connect the Hardware

Images may dier from actual products.

©2026 TP-Link 7100002735 REV2.0.0

Congure the router via Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage your router.

View information about clients

connected to your router

Block unwelcome users from

connecting to your network

Set up Parental Controls

with access time

Change the basic wireless

network settings

Note: If you don’t have an account, create one rst.

1. Download the TP-Link Tether app.

2. Open the Tether app and log in with your TP-Link ID.

3. Tap the button in the Tether app and select Add a Router.

Follow the steps to complete the setup and connect to the internet.

or

How to begin?

Note: Due to Tether app updates, your actual user interface and pathway may dier from those depicted here.

Note: Images are for demonstration only.

Power adapter

3. Enjoy the Internet

Wireless

Wired

Connect your computers to the router's LAN ports via Ethernet cables.

Find the SSIDs (network names) and wireless password printed on the label at the bottom of

the router.

a.

Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then

select the SSID to join the network.

b.

RESET

a. With the gold contacts facing up, insert

the nano SIM card into the slot until you

hear a click.

4G+ Cat6 AX1500 Wireless

b. Connect the power adapter

to the router.

Tip:

You can also install and enable external antennas (not provided). For detailed instructions, refer to the user guide at

https://www.tp-link.com/en/support/download/

Check the following LEDs’ status. If the Internet LED is on, your router is connected to the

internet successfully.

2. Verify the Hardware Connection

It’s recommended to place it

in an open area of your home,

if possible near a window to

obtain better signal.

Recommended Position

DO NOT put it in a

cabinet or place

anything on it.

Note: If the Internet LED does not turn on, please refer to Need Help? >Q2 on the back page.

*Note: First check if your SIM card is protected by a PIN, PUK, or SIM lock, or if there are any account arrears. If the problem

persists, go to Need Help? > Q2 on the back for further assistance.

LEDStatusIndication

On/O

Flashing

On/O

On

O

On

O

On/O

Flashing

Power is on or o.

The system is starting up or rmware is being upgraded. Do not disconnect or power o your modem router.

Wi-Fi is enabled or disabled.

WPS connection is in progress. This may take up to 2 minutes.

At least one LAN port is connected.

No LAN port is connected or LAN port is not connected properly.

Indicates the signal strength received from the mobile internet network. More lit bars indicates a better

signal strength.

There is no mobile internet signal.

Internet service is available or unavailable.

(Signal

Strength)

(Network

Type)

On

O*

The device is on a 4G+ network.

The device is not registered on the network.

For better internet connection, make sure or is lit.

Wireless Password:

XXXXXXXX

SSID:TP-Link_XXXX

4G+ Cat6 AX15

QR

Code

Product specificaties