KanexPro SW-5X1PS-70M Handleiding

Bekijk gratis de handleiding van KanexPro SW-5X1PS-70M (12 pagina’s), behorend tot de categorie Router. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro SW-5X1PS-70M of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SW-5X1PS-70M

PRODUCT MANUAL

5×1 HDMI™/USB-C 4K60 Seamless Presentation Switch with HDBaseT 3.0 70m Out

1. INTRODUCTION

This 5×1 seamless presentation switch features 3 HDMI™ inputs, 2 USB-C inputs (DP Alt mode, USB 2.0, 100M Ethernet and 60W charging), 1

HDMI™ output and 1 HDBT mirrored output. HDBT supports standard PoE power supply and can extend uncompressed signal up to 230ft/70m

(4K@30Hz 4:4:4) or 131ft/40m (4K@60Hz 4:4:4) via a single CAT6A (F/FTP) cable. The output supports single full screen or multiview modes

(Single/PIP/PBP/Triple/Quad).

The switch supports USB 2.0 local KVM switching and local Hub/HDBT USB pass-through (TX to RX), bi-directional RS-232 and IR control signal

pass-through. It features 1 analog audio input, 1 analog audio output, and Dante® 2×2 audio I/O with a built-in 3×3 audio matrix with independent

EQ/volume/delay per output.

Surge Protection Recommended — This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric

shock, or lightning strikes. Use of surge protection is highly recommended.

Cable Note — The HDBaseT connection requires direct wiring only. Do not cross-connect. Use F/FTP shielded CAT6A cable. Wire to T568B standard:

White/Orange, Orange, White/Green, Blue, White/Blue, Green, White/Brown, Brown.

TABLE OF CONTENTS

1. Introduction1

2. Features1

3. Package Contents2

4. Specifications2

5. Operation Controls and Functions3

5.1 Switch Panel (Front & Rear)3

5.2 HDBaseT Receiver Panel4

5.3 IR Cable Pin Assignment5

6. IR Remote5

7. Web GUI User Guide6

8. Dante® Web GUI User Guide8

9. RS-232 Control Commands9

10. Connection Diagram12

2. FEATURES

HDCP 2.2, HDMI™ 2.0b, DP 1.2, HDBaseT 3.0 compliant — 18Gbps video bandwidth

✓

Input resolution up to 4K@60Hz 4:4:4; uncompressed 4K60 over HDBT to 132ft/40m, 4K30/1080p to 230ft/70m via single CAT6A (F/FTP)

✓

5×1 seamless switching (single screen) and fast switching (multiview); up to 5 multiview modes: Single / PIP / PBP / Triple / Quad

✓

USB-C inputs: DisplayPort Alt mode (A/V), USB 2.0, 100M Ethernet, and 60W PD charging

✓

Dante® 2×2 audio I/O with built-in 3×3 audio matrix — independent EQ, volume, and delay per output

✓

Local USB 2.0 KVM switching and USB 2.0 pass-through over HDBT 3.0 to receiver

✓

Analog audio I/O: 1× Line In, 1× Line Out — embedding/de-embedding from audio matrix

✓

CEC/RS-232 control for external device power on/off; advanced EDID management

✓

Front panel buttons, IR remote, RS-232, TCP/IP, Web GUI control; PoE power supply (TX_PSE / RX_PD)

✓

Bi-directional RS-232 and IR signal pass-through over HDBaseT

✓

Scan for product page

kanexpro.com/item/SW-5X1PS-70M

888.975.1368 | [email protected] | kanexpro.com

1 / 12

Product specificaties