KanexPro SW-4X2PS-70M Handleiding

Bekijk gratis de handleiding van KanexPro SW-4X2PS-70M (11 pagina’s), behorend tot de categorie Router. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over KanexPro SW-4X2PS-70M of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SW-4X2PS-70M

PRODUCT MANUAL

4×2 HDMI/USB-C 4K60 Seamless Presentation Switch

with HDBaseT 3.0 70m Out

The KanexPro SW-4X2PS-70M is a 4×2 seamless presentation switch supporting video resolutions up to 4K@60Hz 4:4:4 with HDCP

2.3 compliance. It features multiview display modes for showing multiple sources on a single screen, two HDMI outputs plus one

HDBaseT 3.0 output (mirrored with HDMI OUT 2) extending uncompressed 4K60 4:4:4 up to 132 ft / 40m or 1080p/4K30 up to 230 ft /

70m via a single CAT6A cable.

Four video inputs — two USB-C and two HDMI — support DisplayPort alternate mode A/V up to 4K60 4:4:4, USB 3.2 Gen 1 (5 Gbps)

data, and up to 60W power delivery per USB-C port. Built-in audio DSP provides mixing, matrixing, independent EQ/volume/delay, and

Dante® 2×2 audio I/O. USB 3.2 KVM switching with keyboard/mouse hotkeys and USB 2.0 extension over HDBaseT enable seamless

video conferencing workflows.

Surge Protection Recommended — This product contains sensitive electrical components that may be damaged by electrical spikes,

surges, electric shock, or lightning strikes. Use of surge protection systems is highly recommended.

Caution — The network cable connection method required for this product is direct connection (T568B). Please do not cross connect.

TABLE OF CONTENTS

1. Introduction1

2. Features1

3. Package Contents1

4. Specifications2

5. Operation Controls3–5

5.1 Switch Panel (Front & Rear)3–4

5.2 HDBaseT Receiver Panel5

6. IR Remote / Pin Assignment5

7. Multiview / Hotkey Functions5

8. Default Settings & Web GUI6

9. RS-232 Control Commands7–9

10. Connection Diagram10

11. Troubleshooting11

FEATURES

PACKAGE CONTENTS

1× Presentation Switch • 1× HDBaseT Receiver • 1× IR Blaster Cable (1.5m) • 1× IR Receiver Cable (1.5m) • 3× 3-pin Phoenix Connector • 3× 5-pin

Phoenix Connector • 4× Mounting Ears • 8× Machine Screws • 1× 24V/8A Power Supply with AC Cord • 1× IR Remote • 1× Product Manual

HDMI 2.0b, HDCP 2.3, DP 1.4, and HDBaseT 3.0 compliant

Video resolution up to 4K@60Hz 4:4:4 with 18 Gbps bandwidth

4×2 seamless switching and multiview (Auto, Single, PIP, PBP, Triple, Quad, Custom)

Input: 2× USB-C, 2× HDMI, 1× Analog audio, 1× Dante® 2-channel

Output: 1× HDMI, 1× HDMI + HDBaseT mirrored, 1× Analog audio, 1× Dante® 2-channel

USB-C supports DP Alt Mode A/V, USB 3.2, 1G LAN, and 60W PD charging

Local USB 3.2 KVM switching and USB 2.0 extension over HDBaseT 3.0

HDBaseT 3.0: 4K60 4:4:4 up to 40m, 1080p/4K30 up to 70m via CAT6A

Audio DSP with mixing, matrixing, EQ, volume, delay, and Dante® 2×2 I/O

Keyboard and mouse hotkey switching support

CEC/RS-232 control for external display ON/OFF

Advanced EDID management (17 modes), 8 presets, PoE (TX to RX)

Control via front panel, IR remote, RS-232, TCP/IP, and Web GUI

Scan for product page

kanexpro.com/item/SW-4X2PS-70M

888.975.1368 | [email protected] | kanexpro.com

1 / 11

Product specificaties