Tolsen 35141 Handleiding

Bekijk gratis de handleiding van Tolsen 35141 (1 pagina’s), behorend tot de categorie Laserwaterpas. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Tolsen 35141 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

35141

SAVE THIS MANUAL !

You will need this manual for safety instructions, operating

procedures and warranty.

Put it and the original sales receipt in a safe dry place for future

reference.

1. Laser Windows

2. Mode Button

3. Lock Switch

BEFORE YOU START

General laser safety warnings

IMPORTANT:

• Please read this instruction manual carefully before using

the product, and familiarise yourself with the operation,

adjustments, and functions of the various switches.

• Consider and follow the safety and operating instructions

in order to avoid possible risks and hazards.

• Keep these instructions for future use. If the product is

passed on to a third party then these instructions must be

included.

WARNING! Danger of permanent eye injury!

• Laser radiation! Do not stare into beam.

• Class II laser product.

CAUTION!

• DO NOT attempt to repair or disassemble the

laser-measuring tool. If unqualified persons attempt to

repair this product, serious injury may occur.

Any repair required on this laser product should be

performed only by qualified service personnel.

• DO NOT operate the tool in explosive environments,

such as in the presence of flammable liquids, gases or

dusts. Sparks can be created in the tool which may ignite

the dust or fumes.

• ALWAYS turn off the instrument whenever it is not in use.

Failure to do so will increase the possibility of someone

inadvertently looking directly at the laser beam.

• DO NOT use optical instruments with this product, as this

will increase risk of injury to the eyes.

• DO NOT use laser viewing glasses as safety goggles, as

they do not protect the eyes against laser radiation.

• DO NOT use parts or accessories that have been

designed for use with other laser tools, as this could result

in serious injury or loss of performance.

• The accuracy or performance of the instrument may be

reduced if it is used beyond it’s designed range, or in

strong lighting conditions.

• DO NOT expose the product to shock, continuous

vibration or extreme hot or cold temperatures, as this

could damage the tool and/or cause serious injury to the

user.

• ALWAYS handle the laser product with care. Treat it as

you would any other optical device such as a camera or

binoculars, and DO NOT touch the lens directly.

1. This instrument requires 2 x 1.5V AA batteries.

2. Remove the battery compartment cover.

3. Insert the batteries paying attention to the polarity (+/-)

marked on the compartment and batteries.

4. Close the battery compartment cover.

CAUTION!

• ALWAYS turn off the instrument before replacing the

batteries.

• ALWAYS remove the batteries if the instrument is not to

be used for extended periods.

• ALWAYS use high quality batteries of the same brand,

type and age.

• If the instrument does not work properly, or the low

battery icon is displayed, replace the batteries

immediately.

• DO NOT expose the batteries or instrument to extreme

temperatures or direct heat source, as this can cause the

batteries to leak.

• If the batteries should leak, remove them using a cloth

and dispose of them according to local regulations. Clean

any leaked battery acid avoiding any contact with skin,

eyes & mouth.

• If any contact does occur, rinse affected areas

immediately with fresh water and seek medical advice.

Your self-levelling cross-line laser level has two working

modes.

Self-levelling mode

In this mode, the tool will level itself if it is within ±4° of

horizontal.

1. Place the self-levelling cross-line laser level on a flat,

smooth surface that is within ±4° of horizontal.

2. Turn the tool on by sliding the Lock switch to the up

position. The self-levelling cross-line laser level will

automatically level within 5 seconds.

3. Press the mode button until the desired laser-projection

mode is achieved and the laser line is projected from the

laser aperture.

4. If the laser level is greater than ±4°, the laser line will

blink.

5. To turn off the laser lines, slide the Lock switch to down

position. Press and hold the mode button until the laser

shuts off.

Manual mode

This mode cannot be used to perform horizontal or vertical

levelling, because the laser lines are no longer

self-balancing.

In this mode, the laser line will flash every 3 seconds.

1. Keep the Lock switch off.

2. Press the mode button to turn the laser on and to change

the laser-projection mode.

3. To turn the laser off, press and hold the mode button until

the laser shuts off.

• To ensure the instrument operates at optimal performance

it should be regularly cleaned.

• ALWAYS switch the instrument OFF before cleaning.

• The housing can be cleaned with a damp cloth, taking

care that no water enters the product.

• DO NOT immerse the electrical/optical parts of the

product in water or other liquids, and never hold it under

running water.

• Any lenses can be cleaned using a cotton bud with a small

amount of distilled water or alcohol.

• Aer cleaning, ensure that all parts dry properly before

use.

• The product should be stored carefully, so that it is

protected from dust and scratches.

WARNING!

• DO NOT operate the tool around children or pets, this

product is not a toy and is not intended for use by

children.

• DO NOT remove or destroy any label appearing on this

instrument.

• DO NOT stare directly at the laser beam, as this can cause

blindness. Only turn the laser ON when being used.

• DO NOT place the tool in a position that may cause

anyone to stare at the laser beam, whether intentionally

or unintentionally, and ensure bystanders are aware of the

dangers.

• DO NOT point the laser beam emitted by the instrument

at people or animals.

• DO NOT point the laser onto shiny or reflective surfaces

such as glass or polished metals, as this could reflect the

beam back at the operator or passers by.

• DO NOT attempt to modify the performance of this laser

device in any way.

This may result in a dangerous exposure to laser

radiation.

To install batteries

FUNCTIONS AND SETTINGS

Operation instructions

CLEANING

TECHNICAL DATA

H

2

O

Battery compartment cover

3

2

1

Wavelength

Beam Accuracy

Expanded Angle

Max. working distance

Power Supply

Operating time

Ingression Protection Rate

Operating Temperature

Storage Temperature

Model Function

635nm

H/V Line ±3mm/10m

H&V 120°

20m

2xAA battery

8h

IP54

-10°C - +50°C

-20°C - +70°C

switchable manual model

SELF-LEVELING

CROSS-LINE LASER LEVEL

PAP

22

TOLSEN is a trademark or

registered trademark of TOLSEN

TOOLS. All rights reserved.

MADE IN CHINA

SUZHOU TOLSEN

TOOLS CO.,LTD.

www.tolsentools.com

TolsenWorld

SCAN TO VISIT

PRODUCT LINK

35141

Product specificaties