Bosch GCL165-82CGL Professional Handleiding
Pagina's 80 Laserwaterpas
Bekijk de handleiding van Bosch GCL165-82CGL Professional gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
For English Version
See page 2
●
Version française
Voir page 26
●
Versión en español
Ver la página 50
IMPORTANT
Read Before Using
●
IMPORTANT
Lire avant usage
●
IMPORTANTE
Leer antes de usar
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GCL165-82CG
GCL165-82CG Line Laser OSI Final 20240809.indd 1GCL165-82CG Line Laser OSI Final 20240809.indd 18/9/2024 3:32:54 PM8/9/2024 3:32:54 PM
2
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
General Safety Rules ................3
Bluetooth.........................5
FCC Caution ......................6
ISED Canada ......................6
Intended Use......................6
Symbols..........................7
Getting to Know Your GCL165-82CG
Line Laser......................9
Technical Data....................10
Preparation ......................12
Laser Tool Power Supply .........12
Battery Status Indicator ..........13
Operation .......................14
Initial Operation................14
Switching On and Off............14
Operating Modes ...............14
Automatic Leveling..............15
Remote Control via the Leveling
Remote App ................16
Accuracy Check of the Laser Tool ...17
Working Advice.................20
Use with Attachments............20
Maintenance and Service............25
Environment Protection ..........25
GCL165-82CG Line Laser OSI Final 20240809.indd 2GCL165-82CG Line Laser OSI Final 20240809.indd 28/9/2024 3:32:54 PM8/9/2024 3:32:54 PM
3
General Safety Rules
Read all instructions. Failure to follow all instructions listed below may
result in hazardous radiation exposure, electric shock, re and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “laser tool” in the warnings listed below refers to your battery-operated (cordless)
laser tool.
The following label is on your tool for your safety. ALWAYS BE AWARE of its location when
using the laser.
IEC 60825-1:2014
Line laser: < 10 mW, 500-540 nm
Dot laser: < 1 mW, 500-540 nm
Laser Radiation. Do not stare into the beam. Class 2
Laser product. • Radiación láser. No mire al rayo.
Producto láser de clase 2.
• Rayonnement laser. Ne
regardez pas directement
dans le faisceau. Produit
laser de Classe 2.
DO NOT direct the laser beam
at persons or animals and do
not stare into the laser beam
yourself. This laser tool pro-
duces class 2 laser radiation
and complies with 21 CFR 1040.10 and
1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser No-
tice No. 56, dated May 8, 2019. This can
lead to persons being blinded.
DO NOT stare directly at the laser beam
or project the laser beam directly into the
eyes of others. Serious eye injury could re-
sult.
DO NOT place the laser tool in a position
that may cause anyone to stare into the la-
ser beam intentionally or unintentionally.
Serious eye injury could result.
ALWAYS make sure that any bystanders in
the vicinity of use are made aware of the
dangers of looking directly into the laser
tool.
Never aim the beam at a workpiece with
a reective surface. Bright shiny reective
sheet steel or similar reective surfaces
are not recommended for laser use. Reec-
tive surfaces could direct the beam back to-
wards the operator.
Use of controls or adjustments or per-
formance of procedures other than those
specied herein may result in hazardous
radiation exposure.
DO NOT use any optical tools such as,
but not limited to, telescopes or transits
to view the laser beam. Serious eye injury
could result.
DO NOT leave the laser tool “ON” unat-
tended in any operation mode. ALWAYS
turn the laser tool “OFF” when not in use.
Leaving the laser tool “ON” increases the
risk of someone inadvertently staring into
the laser beam.
Do not use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the
laser beam, but they do not protect against
laser radiation.
Do not use the laser viewing glasses as sun
glasses or in trafc. The laser viewing glass-
es do not afford complete UV protection and
reduce color perception.
ALWAYS position the laser tool securely.
Damage to the laser tool and/or serious in-
jury to the user could result if the laser tool
falls.
DO NOT remove or deface any warning or
caution labels. Removing labels increases
the risk of exposure to laser radiation.
Battery tool use and care
Recharge only with the charger specied
by the manufacturer. A charger that is suit-
able for one type of battery pack may create
SAVE THESE INSTRUCTIONS
GCL165-82CG Line Laser OSI Final 20240809.indd 3GCL165-82CG Line Laser OSI Final 20240809.indd 38/9/2024 3:32:54 PM8/9/2024 3:32:54 PM
Product specificaties
| Merk: | Bosch |
| Categorie: | Laserwaterpas |
| Model: | GCL165-82CGL Professional |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GCL165-82CGL Professional stel dan hieronder een vraag en andere gebruikers zullen je antwoorden