Toa HY-MT7 Handleiding

Toa Niet gecategoriseerd HY-MT7

Bekijk gratis de handleiding van Toa HY-MT7 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.3 sterren uit 8.5 reviews. Heb je een vraag over Toa HY-MT7 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

1. SAFETY PRECAUTIONS

• Beforeinstallationoruse,besuretocarefullyread

all the instructions in this section for correct and

safeoperation.

• Besuretofollowalltheprecautionaryinstructions

in this section, which contain important warnings

and/orcautionsregardingsafety.

• After reading, keep this manual handy for future

reference.

• Donotuseothermethodsthanspeciedtomount

theadapter.Extremeforceisappliedtotheadapter

andthematchingtransformercouldfalloff,possibly

resultinginpersonalinjuries.

• Tighten each nut and bolt securely. Ensure that

the adapter has no loose joints after installation

to prevent accidents that could result in personal

injury.

• Use the specied matching transformer in

combination. Doing otherwise may cause the

adapterormatchingtransformertofalloff,resulting

inpersonalinjury.

• Avoidinstallingthespeakerinlocationsclosetothe

seashore or in indoor swimming facilities that are

not well ventilated. In such locations, the adapter

maybevulnerabletocorrosion,eventuallyallowing

thematchingtransformertofallresultinginpersonal

injury.

Indicatesapotentiallyhazardoussituationwhich,

ifmishandled,couldresult inmoderateorminor

personalinjury,and/orpropertydamage.

CAUTION

• Avoid touching the adapter’s sharp metal edge to

preventinjury.

• Havetheadaptercheckedperiodicallybytheshop

from where it was purchased. Failure to do so

may result in corrosion or damage to the adapter

that could cause the matching transformer to fall,

possiblycausingpersonalinjury.

2. GENERAL DESCRIPTION

The HY-MT7 Matching Transformer Adapter is

designed to mount an optional MT-200 Matching

Transformer*totheHX-7SeriesSpeakerSystem.

* The Matching Transformer is used to convert low

impedancetohighimpedance(100Vor70Vline).

 Refer to the MT-200’s Operating Instructions for

moredetails.

3. MT-200 MOUNTING ExAMPLE

Note

When joiningtwospeakersystems, a separate MT-

200 Matching Transformer must be attached to the

secondspeakersystemaswell.Themountingmethod

isthesameasthatfortheinitialspeakersystem.

INSTALLATION MANUAL

MATChING TRANSFORMER ADAPTER hY-MT7

ThankyouforpurchasingTOA’sMatchingTransformerAdapter.

Pleasecarefullyfollowtheinstructionsinthismanualtoensurelong,trouble-freeuseofyourequipment.

Indicatesapotentiallyhazardoussituationwhich,

if mishandled, could result in death or serious

personalinjury.

WARNING

MT-200

HX-7 Series speaker

Step 1. RemovetheMT-200’scover.

Step 2. Changetheprimaryconnectiontap.

ThetapoftheMT-200isfactory-presetto167Ω.

Changethesettingasrequired.

To change the tap, reconnect the primary black cord

accordingtothetablebelow.

Tap

Line 25Ω 50Ω 83Ω 167Ω

100Vline

–

200W 120W 60W

70Vline 200W 100W 60W 30W

Note: NevertouchthewhitecordconnectedtotheCOMtap.

4. MOUNTING ThE MT-200 MATChING TRANSFORMER

BeforemountingtheMT-200,layoutaprotectivesheet,corrugatedcardboardorothersoftmaterialonaat

surface,andperformallworkonthespeakerwithitsfrontbafefacingdownward.

Speaker module

Speaker system

Note

Each HX-7 Series Speaker System

consists of four speaker modules.

Tightentheboltssecurely,asinstructedbelow.

Failuretofollowinstructionspreciselycouldresultinafallingspeaker

andpotentialpersonalinjury.

• Ensurethatallboltsaresecurelyinsertedasfarastheirthreadsgo,

thensecurelyfasteneachboltwithanut.

• Tighten all the bolts with the designated tightening torque. For

tightening,useaPhillipsscrewdriver,oropen-orbox-endwrench.

WARNING

Cover

Cover fixing screw

MT-200

COM

25 50 83 167Ω Ω Ω Ω

White (–)

Black (+)

Step 3. MounttheMT-200tothisadapter.

Mount the MT-200 as shown in the gure at

right.Itscompletedinstallationisshowninthe

“MT-200MountingExample”gureonthefront

page.

Tip

BesuretokeeptheMT-200’scoverremoved.

Note

Wheninstallingspeakersystemsundereaves,

besuretoinstallinaverticalarray.Further,to

ensure the MT-200’s waterproong capability,

install it so that its top panel surface is tilted

within45ºoftheverticalplane.

If the MT-200’s waterproong capabilities

cannot be ensured by the mounting method

shown in the gure at upper right, mount the

MT-200asshownatlowerright.

Refertotheoperatinginstructionssuppliedwith

theMT-200.

MT-200 (without cover)

This adapter

Tightening torque:

8 N·m

Hex head bolt (supplied

with the MT-200)

Plain washer for M8

(accessory)

Nut for M8

(accessory)

Step 4. Mountthisadaptertotherearpanelofthespeakermodule.

This adapter can be attached to any

speaker module, however there may be

cases in which they cannot be easily

attached due to their combination with

otheroptionalmountingbrackets.Insuch

cases, attach this adapter to any free

speakermodule.

This adapter

Hex head bolt M6 x 16

(with spring and plain

washers, accessory)

Tightening

torque: 3 N·m

MT-200

45°

Top surface

MT-200 (without cover)

Tightening torque:

8 N·m

Hex head bolt (supplied

with the MT-200)

This adapter

Plain washer for M8

(accessory)

Nut for M8

(accessory)

Product specificaties

Merk:	Toa
Categorie:	Niet gecategoriseerd
Model:	HY-MT7
Kleur van het product:	Zwart
Gewicht:	140 g
Breedte:	30 mm
Diepte:	28 mm
Hoogte:	70 mm
Materiaal:	Roestvrijstaal