Thermaltake Pacific V-RX 5700 Handleiding

Thermaltake Hardwarekoeling Pacific V-RX 5700

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific V-RX 5700 (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Pacific V-RX 5700 Series Plus

VGA Water Block

Patented

16.8 Million Color

A x 1 B x 1 C D E F H I x 17 x 5 x 11 x 6 x 6 x 2G x 1

Remove the screws circled on the diagram.

Remove the backplate (Remove the screws circled

on the diagram. All heat sink assembly screws

should be removed).

Use AMD RX 5700XT as a demonstration,

other model reference the installation guide.

When installing the water block, carefully position the water block with the preinstalled standoffs

on the graphics card.

Remove the power connector(Carefully detach the original stock cooler)

Cut the thermal pads to the dimensions listed and place them on the spots shown on the diagram.

Parts List

Apply thermal compound

Clean the original thermal compound

off the GPU die

Finish

This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment.

Before you start using this product please follow these basic guidelines:

1. Please carefully read through the instruction manual before beginning the installation process.

2. Please remove your graphics card from your motherboard to insure the safest process and in order to prevent any possible damages to your CPU and motherboard.

3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

40 mm

54 mm

78 mm

54 mm

9mm

7mm

CD B

Pacific V-RX 5700 Series Plus

VGA Water Block

Patented

16.8 Million Color

Parts List

Installation Guide

15 16

Connect the Waterblock onto the controller.

123

Set the DIP switch on the back side of the controller to assign the

number of the controller

NO. 1

1234

NO. 3

1234

NO. 2

1234

NO. 4

1234

NO. 9

1234

NO. 11

1234

NO. 10

1234

NO. 12

1234

NO. 5

1234

NO. 7

1234

NO. 6

1234

NO. 8

1234

NO. 13

1234

NO. 15

1234

NO. 14

1234

NO. 16

1234

Connect the controller cable onto the mainboard (USB 2.0 9 pin)

and controller.

If you want to connect two or more connectors, you can use the bridge

cable to connect the controllers.

M M

Connect the power cable to the 4pin Molex connecter and controller.

L L

J K L M Px 1 x 1 x 1 x 1 x 1N Ox 1 x 1

Controller Power Cable VelcroController Cable Bridge Cable LED Y - Cable MB SYNC Cable

www.thermaltake.com

Connect the LED Y-Cable onto the waterblock.

1 2 3 4

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific V-RX 5700
Gewicht:	900 g
Breedte:	130.1 mm
Diepte:	262 mm
Hoogte:	22.5 mm
Soort:	Waterblok
Aantal per verpakking:	1 stuk(s)
Kleur van de verlichting:	Blue, Green, Red
Verlichtings-led:	Ja
Geschikte locatie:	Videokaart
Pulsbreedtemodulatie-ondersteuning:	Nee
Waterblok materiaal:	Acryl/Koper
Pomp voltage:	5 V
Stroomverbruik pomp:	6.5 W
Ondersteunde grafische adapters:	AMD Radeon RX 5700, AMD Radeon RX 5700 XT