Texas Instruments ISOM8610 Handleiding

Bekijk gratis de handleiding van Texas Instruments ISOM8610 (27 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over Texas Instruments ISOM8610 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ISOM8610 80V, 150mA Normally Open Opto-emulator Switch With Integrated FETs

1 Features

•Drop-in replacement and pin-to-pin upgrade to

industry-standard photorelays

•Single-channel, diode-emulator input

•Single-pole, normally-open, symmetrical 80V

output switch

•Primary-side current controlled switch, no

additional isolated high voltage supply required for

80V switching

•Ultra-low off-state leakage at V

OFF

= 70V

–< 250nA at operating temperature of 25°C

–< 1μA across operating temperature of –55°C

to 125°C

•Fast Response time: 10μs (typical) at I

F

= 5mA,

V

CC

= 20V, R

L

= 200Ω, C

L

= 50pF

•Ultra-low input trigger current of 800μA (at 25°C)

•Robust isolation barrier:

–Isolation rating: up to 3750V

RMS

–Working voltage: 500V

RMS

, 707V

PK

–Surge capability: up to 10kV

•Supports Industrial Temperature Range: –55°C to

125°C

•Small SO-4 package

•Safety-related certifications:

–UL 1577 recognition, 3750V

RMS

isolation

–DIN EN IEC 60747-17 (VDE 0884-17)

conformity per VDE

–IEC 62368-1, IEC 61010-1

–CQC GB 4943.1

2 Applications

•Factory automation and control

•Building automation

•Appliances

•Test and Measurement

3 Description

The ISOM8610 is an 80V single-pole, normally-

open switch with an opto-emulator input. The opto-

emulator inputs control the back-to-back MOSFETs

without any power supply required on the secondary

side. The devices are pin-compatible and drop-

in replaceable for many traditional optocouplers,

allowing enhancement to industry-standard packages

with no PCB redesign.

The ISOM8610 opto-emulator switch offers significant

reliability and performance advantages compared

to optocouplers, like wider temperature ranges

and tight process controls resulting in small part-

to-part variations. Since there is no aging effect

to compensate for, the emulated diode-input stage

consumes less power than optocouplers that have

LED aging and require higher bias currents over

the device lifetime. ISOM8610 switch output can

be controlled by just 0.8mA current through anode/

cathode pins over the lifetime of the device, enabling

system power savings.

The ISOM8610 is offered in a small SO-4 package,

supporting a 3.75kV

RMS

isolation rating. The high

performance and reliability of the device enable

the devices use in applications like Building

automation, Factory automation, Semiconductor

test, I/O modules in industrial controllers, factory

automation applications, and more spaces.

Package Information

PART

NUMBER

PACKAGE

(1)

PACKAGE

SIZE

(2)

BODY SIZE

(NOM)

ISOM8610DFG (SO, 4)

7.0mm ×

3.5mm

4.8mm ×

3.5mm

(1)For more information, see Section 11.

(2)The package size (length × width) is a nominal value and

includes pins, where applicable.

ISOLATION

1

2

4

3

INPUT

R

LOAD

VSRC

Simplified Application Example

ISOM8610

SLLSFW0B – APRIL 2024 – REVISED SEPTEMBER 2025

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

Product specificaties