Techno Line WT 498 Handleiding
Techno Line
Alarm ringer
WT 498
Lees hieronder de đź“– handleiding in het Nederlandse voor Techno Line WT 498 (4 pagina's) in de categorie Alarm ringer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
INSTRUCTION MANUAL WT 498
INSTALLATION BY AC-ADAPTOR
For best reception of radio controlled signal, keep your clock close to a window and away from
metal surfaces, electrical appliances and magnetic fields. Plug the AC/DC adaptor to an AC
household outlet, then plug the DC jack to the back of the clock. Your clock is ready to work for
you.
INSTALLATION BY BATTERIES
1. Slide open the battery cover at the bottom of your unit.
2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity
signs inside the battery compartment.
3. Replace the battery cover.
4. In case it is too bright in night time, please only use by batteries / without adaptor.
When only batteries are being used, the always-on backlight is off. Press SNOOZE/LIGHT will
light up the LCD for few seconds to view time if need. If user unplugs the DC jack, the clock
will stop to work and no time / alarm. Please remember to put batteries in the clock if user
wants to unplug it.
DCF SINGAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The icon flashes.
Weak or no DCF signal (only icon flashing)
Receiving strong DCF signal ( icon flashing)
Successful Reception ( icon becomes static)
Failed Reception ( icon disappear)
Automatic reception and Manual Reception
Your clock starts automatic rece 00. If it fails to receive the ption everyday at 1:00, 2:00, 3:
DCF time signal at 3:00, it will start reception at 4:00. If it fails again it will start reception
at 5:00. If it fails again it will start automatic reception at 1:00 again next day.
Manual reception : simply press WAVE button once to start manual reception. Press
and hold 2 seconds to stop manual reception.
Remark : when your clock is receiving radio controlled time signal, all buttons except the
snooze / light button do not work.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET for 2 seconds, time digits change to “24 Hr” and flash, press +/- to
select “12 Hr” time format or “24 Hr” time format.
2. Then press SET once again, time digits change to “00”and flash. Press +/- button to
select time zone:
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)
3. Then press SET once again, hour digits flash. Press +/- button to set hour.
4. Then press SET once again, minute digits flash. Press +/- button to set minute.
4. Then press SET once again, time digits change to year “2009” and flash.
Press+/- to set the year.
5. Then press SET once again, month digits flash. Press +/- button to set month.
6. Then press SET once again, date digits flash. Press +/- button to set date.
7. Then press SET once again, day of week digits flash. Press +/- button to select
the language of day of week.
EN = English
GE = German
FR = French
IT = Italian
NE = Dutch
ES = Spanish
DA = Danish
8. Press SET to return to normal mode, or it will return to normal mode in around 30
seconds if no press of any other buttons.
TO SET ALARM TIME
Press and hold ALM SET / ON-OFF once, time digits change to alarm time digits “0:00
AL” and hour digits flash. Then press +/- to set your desired hours of alarm time.
Press ALM SET / ON-OFF once, alarm minute digits flash. Press +/- to set your desired
minutes of alarm time.
Press ALM SET / ON-OFF once to return to normal mode, or it will return to normal mode
in around 30 seconds if no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press ALM SET / On-Off once to turn on or off the daily alarm. When the alarm function
is turned on, the icon appears between the hour and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up.
The icon will flash.
1) Press SNOOZE on the top once to stop the alarm temporarily, the “Bell” and “Zz” icon
keep flashing. The alarm will beep again in 5 minutes.
2) To stop the alarm, press ALM SET / ON-OFF once, the alarm beep will stop and the
icon become static, alarm will beep again same time next day.
Alarm Duration : 2 minutes
AUTOMATIC LIGHT SENSOR
Your clock is equipped with an op right next to the snooze / automatic light sensor on t
light button. The brightness of lower level when your room backlight will be adjusted to
environment is dim.
Please keep your clock at least 1-foot distance away from any objects on top.
TO DISPLAY TEMPERATURE IN °C OR °F
Simply press – (°C/°F) to display temperature in °C or °F.
TROUBLE SHOOTING
In case your clock shows irrelevant information or digits, it maybe affected by
electrostatic discharge or interferences from other devices. Press the RESET button on
the top of your clock. Your clock will be reset to default setting of time and calendar and it
will start to receive radio controlled time signal again.
Product specificaties
| Merk: | Techno Line |
| Categorie: | Alarm ringer |
| Model: | WT 498 |
Heb je hulp nodig?
Als je hulp nodig hebt met Techno Line WT 498 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Alarm ringer Techno Line
7 Juli 2023
7 Juli 2023
7 Juli 2023
6 Juli 2023
6 Juli 2023
5 Juli 2023
4 Juli 2023
2 Juli 2023
2 Juli 2023
1 Juli 2023
Handleiding Alarm ringer
- Alarm ringer Honeywell
- Alarm ringer Abus
- Alarm ringer Amplicom
- Alarm ringer Ascot
- Alarm ringer Auriol
- Alarm ringer Beurer
- Alarm ringer Blaupunkt
- Alarm ringer Digi-tech
- Alarm ringer Envivo
- Alarm ringer Geemarc
- Alarm ringer GlobalTronics
- Alarm ringer Grothe
- Alarm ringer Hama
- Alarm ringer HQ
- Alarm ringer Hyundai
- Alarm ringer Konig
- Alarm ringer Lenco
- Alarm ringer Monacor
- Alarm ringer MT Logic
- Alarm ringer Nikkei
- Alarm ringer Renkforce
- Alarm ringer Sencor
- Alarm ringer Smartwares
- Alarm ringer Soundmaster
- Alarm ringer TFA
- Alarm ringer Velleman
- Alarm ringer Jung
- Alarm ringer Olympia
- Alarm ringer Oregon Scientific
- Alarm ringer Cresta
- Alarm ringer Delta Dore
- Alarm ringer Electia
- Alarm ringer La Crosse Technology
- Alarm ringer Dahua Technology
- Alarm ringer Homematic IP
- Alarm ringer Vimar
- Alarm ringer Pentatech
- Alarm ringer Gewiss
Nieuwste handleidingen voor Alarm ringer
31 Januari 2024
31 Januari 2024
31 Januari 2024
31 Januari 2024
4 September 2023
5 Juli 2023
3 Juli 2023
29 Juni 2023
29 Juni 2023
28 Juni 2023