Techno Line WT 189 Handleiding

Bekijk gratis de handleiding van Techno Line WT 189 (3 pagina’s), behorend tot de categorie Alarm ringer. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Techno Line WT 189 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTION MANUAL WT189

FEATURES:

- Radio controlled clock

- Manual time setting

- -or 24-hour time display 12

- Calendar display

- Time zone (+/- 12 hours)

- Indoor temperature in °C/°F

- Alarm snooze function

- 5 languages selectable display in Day-of week: German, English, Spanish, Italian and French –

- Jumbo LCD

- B-light ack

SETTING UP:

1.Firstly, open the battery cover at the back of the clock.

2.2 Checking the correct polarization, insert x AAA, LR3, 1.5V batteries into the compartment and

replace the cover.

3.When the batteries are inserted, the clock will be automatically scanning for the radio controlled

time signal.

4.If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter

manual time setting)

5.If the clock cannot receive the signal at the rst time, it will automatically attempt to receive the

signal again one hour later.

6.The clock will automatically receive the signal everyday 2.00 am.

7.When the clock is scanning for signal, only the WAVE key is operational.

MANUAL TIMETING:

In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this

situation, the time should be set manually.

1.Press and hold the TIME key for 3 seconds and the hour digits will start ashing, press or “”▲▼

key to adjust the hour.

2.Press the TIME key again and the minute digits will start ashing, press the or key to “”▲▼

adjust the minute.

3.Press the TIME key again and the second digits will start ashing, press the or key to clear “”▲▼

the second to 0. “”

4.Press the TIME key again and the year digits will start ashing, press or key to adjust the “”▲▼

year.

5.Press the TIME key again and the dash between date and month will start ashing, press “”“”“”

Product specificaties