Taylor 806 Handleiding

Bekijk gratis de handleiding van Taylor 806 (1 pagina’s), behorend tot de categorie Voedsel thermometer. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Taylor 806 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTION MANUAL

806/806E/806GW

806/806E/806GW 5.25 WC

ONE YEAR LIMITED WARRANTY

Taylor® warrants this product to be free from defects in

material or workmanship (excluding battery) for one (1) year

from the original purchaser from the date of retail purchase. It

does not cover damages to wear resulting from accident,

misuse, abuse, commercial use, or unauthorized adjustment

and/or repair. If help or troubleshooting is required, do not

return to retailer. Should this product require service (or

replacement at our option), while under warranty, contact

Taylor for return authorization and troubleshooting assistance.

Phone: 866-843-3905 (8-5pm MST, M-F)

Email: [email protected]

Web: taylorusa.com

There are no express warranties except as listed above. This

warranty gives you specific legal rights, and you may have

other rights which vary from state to state. For additional

product information, or warranty information outside the USA,

please contact us through www.taylorusa.com.

Made to our exact specifications in China.

©2025 Taylor, a division of Lifetime Brands Inc. All rights

reserved. Oak Brook, IL 60523

GENERAL OPERATION

CLEANMEASURE FEATURE

CALIBRATION

BATTERY REPLACEMENT

The thermometer operates on 1 CR2032 (3V) lithium battery. If

the unit does not turn on for first use, remove and then reinstall

the battery. Change the battery when the display becomes dim.

To replace battery:

1. Using a coin or tool in the slot, press in on the door then turn

it counterclockwise to open.

2. Remove used battery and insert new one, with the "+" sign

facing up.

3. Close the compartment. Make sure the o-ring is seated

around the opening to maintain waterproof feature. Note: If

battery door is not closed properly, water can get into the

battery compartment causing the unit to malfunction.

CleanMeasure™ surface protection inhibits bacterial growth on the

plastic sleeve only to ensure a safer, more hygienic thermometer.

Cleaning still required before and after each use..

Waterproof Digital Thermometer

1. Sterilize the metal probe by inserting it into an appropriate

solution such as boiling water for several minutes.

2.On/OFF Press "" to turn the unit on. Press again for a 5 second

backlight. Press "" to select temperature scale. Note: To ºF/ºC

save battery life, this unit has an AUTO-OFF feature that turns

the instrument off after 5 minutes if no buttons are pressed and

the temperature reading is lower than 122°F (50°C). Press and

hold “ to turn off manually.On/OFF”

3. The sensor is located in the probe tip for a quick response and

accurate reading. When ready to test the temperature, insert

thermometer probe into the center of the product for an

accurate temperature measurement. The LCD will stabilize when

reading is complete (approximately 10 seconds).

4.Hold Hold Feature: Press the "" button and the temperature will

be held (the "HOLD" icon will appear). Press again to release.

5.Max/ Max Feature: Press the "s" button once to read the

maximum temperature that the probe has reached (the word

“Max” will appear). Press the " button again to read the Max/s"

minimum temperature that the probe has reached (the word

“Min” will appear). Press "" a third time to return to the Max/s

current temperature reading. Otherwise the unit will

automatically return to the current temperature reading after 10

seconds.

6. To avoid burns near heat, snap the pocket sleeve onto the

opposite end of the thermometer and use as a handle.

If recalibration is necessary, for best results calibrate within the

temperature range most commonly used. Always utilize a reliable

source as a benchmark when calibrating. If a verified reference

temperature cannot be achieved in the usage range, then calibrate

in an ice bath as described in Step 1.

1. Suspend probe at least 1” into a 'slush' of crushed ice and water

(32°F) for at least 30 seconds. Keep the probe from touching the

container bottom.

2. Press and hold the “SET” button for 5 seconds. The word “SET”

will appear. Then press "Max/s" and "Hold/t" at the same

time to enter Temperature Setting mode. The LCD will turn red.

The current temperature blinks.

3. Press "Max/s" or "Hold/t" to increase/decrease the

temperature by 1°F (0.5°C)

4. To enter the recalibrated temperature, press and hold the “SET”

button for 5 seconds. The LCD will turn green. A “----” pattern

appears, then “OK”.

5. After 2 seconds, the unit will return to normal mode.

6. To restore the default calibration temperature, remove the

battery for 1 minute and then replace it. (Note: If no buttons are

pressed for 30 seconds, the unit will automatically return to normal

mode.)

806_806E_806GW IM Updated again

Origin Date: 3/20/24

Revised Date: 8/26/24

Today’s Date: 5/27/25

Designer: Wendell W. Cisco II

Front

Back

• Remove and immediately recycle or dispose of used

batteries according to local regulations and keep away from

children. Do NOT dispose of batteries in household trash or

incinerate.

• Even used batteries may cause severe injury or death.

• Call a local poison control center for treatment information.

• This product works on 1 x CR2032 (3V) batteries. Always

purchase the correct size and grade of battery most suitable

for the intended use.

• Non-rechargeable batteries are not to be recharged.

• Do not force discharge, recharge, disassemble, heat above

60°C, or incinerate. Doing so may result in injury due to

venting, leakage or explosion resulting in chemical burns.

• Ensure the batteries are installed correctly according to

polarity (+ and -).

• Do not mix old and new batteries, different brands or types of

batteries, such as alkaline, carbon-zinc, or rechargeable

batteries.

• Remove and immediately recycle or dispose of batteries

from equipment not used for an extended period of time

according to local regulations.

• Always completely secure the battery compartment. If

the battery compartment does not close securely, stop

using the product, remove the batteries, and keep them

away from children.

• PRECAUTION: Do not dispose of batteries in fire.

Batteries may explode or leak.

• Clean the battery contacts and also those of the device

prior to battery installation.

• WARNING: Batteries may pose a choking hazard. As with

all small items, do not let children handle batteries. If

swallowed, seek medical attention immediately.

• Tell others about the risk associated with button

batteries and how to keep their children safe.

Product specificaties