Tado Starter Kit - Wired Smart Thermostat V3 plus Thermostaat Handleiding

Tado Thermostaat Starter Kit - Wired Smart Thermostat V3 plus Thermostaat

Lees hieronder de 📖 handleiding in het Nederlandse voor Tado Starter Kit - Wired Smart Thermostat V3 plus Thermostaat (8 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 86 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

This manual is meant exclusively for professional installers. It includes generic instructions to install the tado˚ Smart

Thermostat.

Manual for Professional

Installers

For the Starter Kit - Wired Smart Thermostat V3+

English International

Manual version 3.2

DIY Installation

If you are not a professional installer, please download the tado˚ app. There you will find specific installation instructions.

A. Remove the battery

protection strip.

B. Press the button for

3 sec to start pairing.

C. Pairing may take up

to 2 min.

D. The static icon below

indicates successful pairing.

If pairing fails (E0), make sure the distance between the devices is approximately 3 meters. Pair again by pressing the

button for 3 sec.

2. Pair the Smart Thermostat

1. Install the Internet Bridge

A. Connect the Internet Bridge to the router.

If no free USB port is available on the router, use the

included 5V power adapter.

B. Press and hold the pairing button until the pairing LED

starts blinking.

min

sec

Solid on

Blinking

Unfold to check:

Step 4: Wire the Smart Thermostat

Step 5: Configuration

Mount the backplate of the Smart Thermostat to the wall using the included screws or the adhesive pads.

3. Mount the Smart Thermostat

Product specificaties

Merk:	Tado
Categorie:	Thermostaat
Model:	Starter Kit - Wired Smart Thermostat V3 plus Thermostaat

Heb je hulp nodig?

Als je hulp nodig hebt met Tado Starter Kit - Wired Smart Thermostat V3 plus Thermostaat stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag