Supermicro X7DCT Handleiding

Supermicro Moederbord X7DCT

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DCT (82 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/82

SUPER

X7DCT

USER’S MANUAL

Revision 1.0

X7DCT-10G

Manual Revision 1.0

Release Date: March 31, 2008

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of

the X7DCT/X7DCT-10G motherboard. The X7DCT/X7DCT-10G

supports dual Intel Xeon Quad-Core/Dual-Core 5400/5300/5200/5100 Series

processors with a front side bus speed of up to 1.333 GHz. With dual 64-bit Xeon

Quad-Core/Dual-Core LGA 771 processors built-in, the X7DCT/X7DCT-10G offers

substantial functionality enhancements to the motherboards based on the Intel Core

microarchitecture while remaining compatible with the IA-32 software. The features

include Intel Virtualization Technology, Enhanced Intel SpeedStep technology, and

Extended Memory 64 Technology (EM64T). These features allow the motherboard

to operate at much higher speeds with better power management in much safer

thermal environments than the traditional motherboards. The X7DCT/X7DCT-10G

is ideal for intense computing environments, complex business applications and

high- end workstations. Please refer to the motherboard speciﬁ cations pages on

our web site (http://www.supermicro.com/products/motherboard/) for updates. This

product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see , which describes Chapter 3

troubleshooting procedures for the video, the memory and the system setup stored

in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A Appendix C provides BIOS POST Error Codes. Appendix B and list

the Windows OS and Other Software Programs Installation Instructions.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DCT
Breedte:	416.6 mm
Diepte:	165.1 mm
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 771 (Socket J)
Ingebouwde grafische adapter:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5100
PCI Express x16 slots:	1
Geheugen kanaal:	Dubbelkanaals
Seriële poort(en):	1
Geheugen voltage:	1.8 V
Soorten RAID:	0, 1,5, 10
Aantal DIMM sloten:	6
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Supported memory clock speeds:	533 MHz
BIOS type:	Phoenix
Grootte BIOS-geheugen:	16 Mbit
USB 2.0 aansluitingen:	5